Press Brake, WC67K Series
Request a Quote
Features
- This press brake’s working cycle is divided into a fast approach, forming, and fast return phases, all enabled by the use of a second oil cylinder. The pressurized fluid will either extend or retract the cylinder to maintain the balance.
- The 3-cylinder structure improves the press brake’s bending precision.
- This press brake supports hydraulic synchronous control and an CNC programmable logic controller to ensure uniform operation and precise bending effects. An accurate positioning is supported through an enabled X and Y axis through an NC CNC system programming control to calculate the bending angle.
Technical Parameters
Model | Nominal force (KN) | Table Length (mm) | Distance between frames (mm) | Throat depth (mm) | Ram stroke (mm/min"1) | Max. open height (mm ) | Motor | Dimensions LxWxH (mm ) |
Power | ||||||||
(KW) | ||||||||
40T/2200 | 400 | 2200 | 1600 | 260 | 100 | 320 | 4 | 2200x1200x1910 |
40T/2500 | 400 | 2500 | 1900 | 260 | 100 | 320 | 4 | 2500x1200x1910 |
50T/2500 | 500 | 2500 | 1900 | 260 | 100 | 330 | 5.5 | 2500x1260x2000 |
63T/2500 | 630 | 2500 | 1900 | 280 | 120 | 330 | 5.5 | 2500x1300x2210 |
63T/3200 | 630 | 3200 | 2600 | 280 | 120 | 330 | 5.5 | 3200x1300x2210 |
80T/3200 | 800 | 3200 | 2600 | 300 | 120 | 360 | 7.5 | 3200x1400x2300 |
80T/4000 | 800 | 4000 | 3100 | 300 | 120 | 360 | 7.5 | 4000x1400x2300 |
100T/2500 | 1000 | 2500 | 1900 | 320 | 120 | 380 | 7.5 | 2500x1500x2400 |
100T/3200 | 1000 | 3200 | 2600 | 320 | 120 | 380 | 7.5 | 3200x1500x2400 |
100T/4000 | 1000 | 4000 | 3100 | 320 | 120 | 380 | 7.5 | 4000x1500x2400 |
125T/3200 | 1250 | 3200 | 2600 | 320 | 120 | 380 | 7.5 | 3200x1550x2500 |
125T/4000 | 1250 | 4000 | 3100 | 320 | 120 | 380 | 7.5 | 4000x1550x2500 |
160T/3200 | 1600 | 3200 | 2550 | 340 | 200 | 460 | 11 | 3200x1650x2700 |
160T/4000 | 1600 | 4000 | 3050 | 340 | 200 | 460 | 11 | 4000x1650x2700 |
160T/5000 | 1600 | 5000 | 3950 | 340 | 200 | 460 | 11 | 5000x1750x3100 |
160T/6000 | 1600 | 6000 | 4950 | 340 | 200 | 460 | 11 | 6000x1800x3200 |
200T/3200 | 2000 | 3200 | 2600 | 360 | 200 | 460 | 15 | 3200x1950x2800 |
200T/4000 | 2000 | 4000 | 3100 | 360 | 200 | 460 | 15 | 4000x1950x2800 |
200T/5000 | 2000 | 5000 | 4000 | 360 | 200 | 460 | 15 | 5000x1950x3000 |
200T/6000 | 2000 | 6000 | 5000 | 360 | 200 | 460 | 15 | 6000x2000x3200 |
250T/3200 | 2500 | 3200 | 2600 | 400 | 250 | 460 | 18.5 | 3200x2000x3200 |
250T/4000 | 2500 | 4000 | 3100 | 400 | 250 | 460 | 18.5 | 4000x2000x3400 |
250T/5000 | 2500 | 5000 | 4000 | 400 | 250 | 460 | 18.5 | 5000x2000x3400 |
250T/6000 | 2500 | 6000 | 5000 | 400 | 250 | 460 | 18.5 | 6000x2000x3400 |
300T/3200 | 3000 | 3200 | 2600 | 400 | 250 | 520 | 22 | 3200 x 2000 x 3400 |
300T/4000 | 3000 | 4000 | 3100 | 400 | 250 | 520 | 22 | 4000x2000x3450 |
300T/5000 | 3000 | 5000 | 4000 | 400 | 250 | 520 | 22 | 5000x2000x3450 |
300T/6000 | 3000 | 6000 | 5000 | 400 | 250 | 520 | 22 | 6000x2000x3450 |
350T/4000 | 3500 | 4000 | 3100 | 400 | 250 | 520 | 22 | 4000x2080x3450 |
350T/5000 | 3500 | 5000 | 4000 | 400 | 250 | 520 | 22 | 5000x2080x3450 |
350T/6000 | 3500 | 6000 | 5000 | 400 | 250 | 520 | 22 | 6000x2080x3450 |
400T/4000 | 4000 | 4000 | 3100 | 400 | 300 | 560 | 30 | 4000x2180x3500 |
400T/5000 | 4000 | 5000 | 4000 | 400 | 300 | 560 | 30 | 5000x2180x3500 |
400T/6000 | 4000 | 6000 | 5000 | 400 | 300 | 560 | 30 | 6000x2180x3800 |
500T/4000 | 5000 | 4000 | 3100 | 400 | 300 | 600 | 37 | 4000x2250x3700 |
500T/5000 | 5000 | 5000 | 4000 | 400 | 300 | 600 | 37 | 5000x2250x3700 |
500T/6000 | 5000 | 6000 | 5000 | 400 | 300 | 600 | 37 | 6000x2300x3800 |
600T/4000 | 6000 | 4000 | 3100 | 400 | 300 | 600 | 45 | 4000x2400x3700 |
600T/5000 | 6000 | 5000 | 4000 | 400 | 300 | 600 | 45 | 5000x2400x3700 |
600T/6000 | 6000 | 6000 | 5000 | 400 | 300 | 600 | 45 | 6000 x 2400 x 3800 |
DA-41S Control System
- Servo control technology
- 4.7 " high-brightness LCD screen, multi-language interface
- Parameter setting for press brake die, programming of the bending angle
- 100 programs stored, 25 steps per program
- Processing quantity counting and power-off memory functions
- mm/inch conversion
Standard Configurations
- Main motor from Siemens
- Ball screw and linear rail from Taiwan HIWIN
- Electrical system from French SCHNEIDER
- Oil pump from Sunny
- Manifold valve from REXROTH
- Standard dies
- Clamping system
- Front arms
- Servo motor
- Foot switch
Optional
- Safety light curtain
- Dual guide rail crossbar
- Clamping system
- Sectional CNC tooling
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos