HS260 - Brass Flare Fittings
Request a Quote
Pipe fittings for use with copper tubing, steel tubing and aluminum tubing
We offer a wide variety of brass flare fittings including standard 45°, inverted 45°, POL, gas range, and fine thread (9/16” x 24) for space heater applications.
Brass flare fittings are designed for higher pressure applications and are commonly used for gasoline, grease, oil, water, vacuum, air lines and natural gas. Flare fittings can also be used for refrigeration, air conditioning, and other applications involving hard to hold liquids and gases using forged nuts.
It is recommended for use with copper, brass, aluminum, and welded steel hydraulic tubing that can be flared and not recommended for use with polybutylene or soft plastic tubing.
Features- Working Temperature: -65°F to 250°F
- Working Pressure: Temperature and type of tubing must be considered for proper fitting selection.
- The following is based on 70°F with copper tube. POL and Gas fittings have a maximum working pressure of 250psi.
Structure
- Brass Flare Union
- Brass Flare Elbow
- Brass Flare Tee
Brass Flare Union
Flare to Flare Euqal Union, HS260-001
| Size |
| 1/4“ |
| 5/16“ |
| 3/8“ |
| 1/2“ |
| 5/8“ |
| 3/4“ |
| 7/8“ |
Flare to Flare Reducing Union, HS260-002
| Size | |
| 3/8“×1/4“ | 3/4“×3/8“ |
| 1/2“×1/4“ | 3/4“×1/2“ |
| 1/2“×3/8“ | 3/4“×5/8“ |
| 5/8“×3/8“ | |
| 5/8“×1/2“ | |
Flare to Female Coupling, HS260-003
| Size | ||
| 1/4“×1/8"F | 3/8“×3/8"F | 5/8“×1/2"F |
| 1/4“×1/4"F | 3/8“×1/2"F | 5/8“×3/4"F |
| 1/4“×3/8"F | 3/8“×3/4"F | 3/4“×3/4"F |
| 1/4“×1/2"F | 1/2“×3/8"F | 7/8“×3/4"F |
| 5/16“×1/4"F | 1/2“×1/2"F | |
| 3/8“×1/4"F | 1/2“×3/4"F | |
Flare to Male Coupling, HS260-004
| Size | |||
| 1/4“×1/8"M | 5/16“×1/4"M | 3/8“×3/4"M | 5/8“×1/2"M |
| 1/4“×1/4"M | 3/8“×1/8"M | 1/2“×3/8"M | 5/8“×3/4"M |
| 1/4“×3/8"M | 3/8“×1/4"M | 1/2“×1/2"M | 3/4“×3/4"M |
| 1/4“×1/2"M | 3/8“×3/8"M | 1/2“×3/4"M | 7/8“×3/4"M |
| 5/16“×1/8"M | 3/8“×1/2"M | 5/8“×3/8"M | |
Flare Plug, HS260-009
| Size |
| 1/4“ |
| 5/16“ |
| 3/8“ |
| 1/2“ |
| 5/8“ |
| 3/4“ |
| 7/8“ |
Flare to Flare Swivel, HS260-010
| Size |
| 1/4“ |
| 3/8“ |
| 1/2“ |
| 5/8“ |
| 3/4“ |
Brass Flare Elbow
Flare to Flare Elbow, HS260-005
| Size |
| 1/4“ |
| 5/16“ |
| 3/8“ |
| 1/2“ |
| 5/8“ |
| 3/4“ |
| 7/8“ |
Flare to Female Elbow, HS260-006
| Size | |
| 1/4“×1/4"F | 1/2“×3/4"F |
| 1/4“×3/8"F | 5/8“×1/2"F |
| 3/8“×3/8"F | 5/8“×3/4"F |
| 3/8“×1/2"F | 7/8“×3/4"F |
| 1/2“×3/8"F | |
| 1/2“×1/2"F | |
Flare to Male Elbow, HS260-007
| Size | ||
| 1/4“×1/8"M | 3/8“×1/2"M | 7/8“×3/4"M |
| 1/4“×1/4"M | 1/2“×3/8"M | |
| 3/8“×1/8"M | 1/2“×1/2"M | |
| 3/8“×1/4"M | 5/8“×1/2"M | |
| 3/8“×3/8"M | 5/8“×3/4"M | |
Brass Flare Tee
Flare 3-End Tee and Reducing Tee, HS260-008
| Size | |
| 1/4“ | 3/8“×3/8“×1/4“ |
| 3/8“ | 1/2“×1/2“×3/8“ |
| 1/2“ | 5/8“×5/8“×3/8“ |
| 5/8“ | 5/8“×5/8“×1/2“ |
| 3/4“ | |
Related Manufacturies
Leave Message
Similar Manufacturies and Parts
Manufacturer Advertising
More
Similar Manufacturies and Parts
Videos
