HS270 - Brass Compression Fittings for USA
Request a Quote
Pipe fittings for use with copper tubing, aluminum tubing and plastic tubing
The brass compression fittings are ideal for use with copper, brass, aluminum, or plastic tubing and are commonly used on gasoline, grease, oil, water, vacuum, and air lines. The fittings are not recommended for use with steel tube.
Features- Working Temperature: -65°F to 250°F
- Working Pressure: Temperature and type of tubing must be considered for proper fitting selection.
- The following is based on 70°F with copper tube.
Cut tube square on the end. Start tubing on the insert and slide into the fitting until it hits the stop. Wrench tightens approximately 1 1/2 to 2 turns beyond hand tight. Do not over tighten.
Structure
- Brass Compression Union
- Brass Compression Elbow
- Brass Compression Tee
Brass Compression Union
Compression Union, HS270-001
| Size | |
| 1/8“ | 1/2“ |
| 3/16“ | 5/8“ |
| 1/4“ | 3/4“ |
| 5/16“ | 7/8“ |
| 3/8“ | |
Compression Reducing Union, HS270-002
| Size | |
| 1/4“×1/8“ | 5/8“×3/8“ |
| 1/4“×3/16“ | 5/8“×1/2“ |
| 3/8“×1/4“ | |
| 5/16“×1/4“ | |
| 1/2“×3/8“ | |
Compression Female Connector, HS270-003
| Size | ||
| 1/8“×1/8"F | 1/4“×1/2"F | 3/8“×3/8"F |
| 3/16“×1/8"F | 5/16“×1/8"F | 3/8“×1/2"F |
| 3/16“×1/4"F | 5/16“×1/4"F | 3/8“×3/4"F |
| 1/4“×1/8"F | 5/16“×3/8"F | 1/2“×1/4"F |
| 1/4“×1/4"F | 3/8“×1/8"F | 1/2“×3/8"F |
| 1/4“×3/8"F | 3/8“×1/4"F | 1/2“×1/2"F |
| 3/4“×1/2"F | 5/8“×3/8"F | 1/2“×3/4"F |
| 3/4“×3/4"F | 5/8“×1/2"F | 7/8“×1/2"F |
| 5/8“×3/4"F | 7/8“×3/4"F | |
Compression Male Connector, HS270-004
| Size | ||
| 1/8“×1/8"M | 1/4“×1/2"M | 3/8“×3/8"M |
| 3/16“×1/8"M | 5/16“×1/8"M | 3/8“×1/2"M |
| 3/16“×1/4"M | 5/16“×1/4"M | 3/8“×3/4"M |
| 1/4“×1/8"M | 5/16“×3/8"M | 1/2“×1/4"M |
| 1/4“×1/4"M | 3/8“×1/8"M | 1/2“×3/8"M |
| 1/4“×3/8"M | 3/8“×1/4"M | 1/2“×1/2"M |
| 1/2“×3/4"M | 3/4“×1/2"M | 7/8“×1/2"M |
| 5/8“×3/8"M | 3/4“×3/4"M | 7/8“×3/4"M |
| 5/8“×1/2"M | 5/8“×3/4"M | |
Brass Compression Elbow
Compression Equal Elbow, HS270-005
| Size | |
| 1/8“ | 1/2“ |
| 3/16“ | 5/8“ |
| 1/4“ | 3/4“ |
| 5/16“ | 7/8“ |
| 3/8“ | |
Compression Female Elbow, HS270-006
| Size | |||
| 1/8“×1/8"F | 1/4“×1/2"F | 3/8“×3/8"F | 5/8“×3/8"F |
| 3/16“×1/8"F | 5/16“×1/8"F | 3/8“×1/2"F | 5/8“×1/2"F |
| 3/16“×1/4"F | 5/16“×1/4"F | 1/2“×1/4"F | 5/8“×3/4"F |
| 1/4“×1/8"F | 5/16“×3/8"F | 1/2“×3/8"F | 3/4“×1/2"F |
| 1/4“×1/4"F | 3/8“×1/8"F | 1/2“×1/2"F | 3/4“×3/4"F |
| 1/4“×3/8"F | 3/8“×1/4"F | 1/2“×3/4"F | 7/8“×3/4"F |
Compression Male Elbow, HS270-007
| Size | |||
| 1/8“×1/8"M | 1/4“×1/2"M | 3/8“×3/8"M | 5/8“×3/8"M |
| 3/16“×1/8"M | 5/16“×1/8"M | 3/8“×1/2"M | 5/8“×1/2"M |
| 3/16“×1/4"M | 5/16“×1/4"M | 1/2“×1/4"M | 5/8“×3/4"M |
| 1/4“×1/8"M | 5/16“×3/8"M | 1/2“×3/8"M | 3/4“×1/2"M |
| 1/4“×1/4"M | 3/8“×1/8"M | 1/2“×1/2"M | 3/4“×3/4"M |
| 1/4“×3/8"M | 3/8“×1/4"M | 1/2“×3/4"M | 7/8“×3/4"M |
Brass Compression Tee
Compression 3-End Tee, HS270-008
| Size | |
| 1/8“ | 1/2“ |
| 3/16“ | 5/8“ |
| 1/4“ | 3/4“ |
| 5/16“ | 7/8“ |
| 3/8“ | |
Compression Male Tee, HS270-009
| Size |
| 1/4“×1/4“×1/4“M |
| 3/8“×3/8“×1/4“M |
| 3/8“×3/8“×3/8“M |
| 1/2“×1/2“×3/8“M |
| 1/2“×1/2“×1/2“M |
Related Manufacturies
Leave Message
Similar Manufacturies and Parts
Manufacturer Advertising
More
Similar Manufacturies and Parts
Videos
