PM-VSD Rotary Screw Compressor, VP Series

PM-VSD Rotary Screw Compressor, VP Series
PM-VSD Rotary Screw Compressor, VP Series
PM-VSD Rotary Screw Compressor, VP Series
PM-VSD Rotary Screw Compressor, VP Series
PM-VSD Rotary Screw Compressor, VP Series
Request a Quote

Our VP series PM-VSD rotary screw compressor is 6-20% more energy efficient than those compressed air systems with conventional three-phase asynchronous motors. With a relatively wide frequency range of 30-200hz, this variable speed drive (VSD) screw compressor consumes 15-35% less energy in comparison to the other air compressors with operating frequency of 30-100hz. The motor is IE3 and MEPS standards compliant.

  • Request a quote
  • Power 5.5-132kW
  • Working pressure 8-15bar
  • Free air delivery 0.14-23.08m³/min
  • Features
  • Advantages
  • Specifications
Features
  • Maintain the pressure of pipeline network within ±0.01MPa;
  • Reduced average working pressure and less leakage;
  • The method of soft start increases current balance of motor, and avoids power surges;
  • Our PM-VSD rotary screw compressor can be designed and configured according to your specific needs, such as air-cooling / water-cooling method, oil content, weight and dimension;
  • Wider frequency adjustable from 30-200Hz, widely adjust range can well suit consumer’s condition.
  • More inverters could be selected as Siemens, ABB, Vaconn, Schneider, HOLIP inverter (optional).
  • 1-year compressor warranty, 3-year air end warranty;
Advantages

Upgraded screw air end, higher flow The high output air end and motor operate at slow rotating speed, each rotor works at appropriate speed to deliver the optimum ratio between the delivery rate and pressure, enabling the high level of efficiency.

Wider frequency range of 30-200hz, 15-35% less energy consumption The new generation of control system and cooling fan adopts dual frequency converter to ensure stable and energy-saving operation. The modular design allows for easy maintenance of the air compressor. The PCB coating protects the components from dust, moisture and abrasion. The heat radiation design permits the air compressor to use in working environment with high ambient temperature up to 50℃.

Higher efficient PM-VSD motor, IE3/IE4, IP55, SF.1.2, TEFC standard applied for compressor. Upgraded PM-VSD motor could reach Max.96.8% efficiency, 30—200 hz frequency adjusted for better energy-saving performance and to reach energy efficiency standard of CN-CE-1306-06/21.

Intake valve with large opening Normally closed intake valve with large diameter features extremely low pressure drop, leading to lower failure and prolonged service life.

High durability& performance intake valve system

  • We use high end AIV//JIV/MPV series IGV and MPV
  • Safe: 16bar design pressure
  • Reliable: higher quality
  • Longer life: reliable spare parts

High efficient& enlarged cooling system, centrifugal fan (optional)

  • Motor IP class : IP44;
  • Motor without self cooled function;
  • Motor without service factor;
  • Low cooling air flow;
  • Lower cooling air pressure;

The SMART CONTROLLER ensures efficient control and system monitoring Block mode can be set as VSD –VSD, PF-PF or VSD- PF. The controller can remotely control a maximum of 16 devices, 1.2 terminals (RS485 terminal).

High filtration efficiency 99.99% of dust particles are removed before entering the air end, efficiently ensuring longer service life of the air compressor.

Technical Specifications
Model Air flow(m3/min)* Power(kw) In/Outlet Noise Dimension Weight
8bar 10bar 13bar 15bar Motor Motor(Fan) dB(A)** L×W×H in mm kg
LGCD-5.5 VP
0.22-0.87 0.19-0.75 0.16-0.61 0.14-0.53 5.5 0.09 G1 69 900×750×900 255
LGCD-7.5 VP
0.30-1.20 0.26-1.04 0.23-0.90 0.2-0.80 7.5 0.09 G1 69 900×750×900 260
LGCD-11 VP
0.45-1.79 0.40-1.58 0.35-1.32 0.3-01.17 11 0.18 G1 70 950×800×1290 390
LGCD-15 VP
0.60-2.40 0.55-2.15 0.46-1.84 0.42-1.66 15 0.18 G1 70 950×800×1290 400
LGCD-20 VP
0.75-3.00 0.73-2.90 0.65-2.52 0.55-2.02 18.5 0.37 G1 71 1250×960×1300 555
LGCD-22 VP
0.88-3.51 0.80-3.16 0.68-2.71 0.62-2.45 22 0.37 G1 71 1250×960×1300 695
LGCD-30 VP
1.25-4.88 1.10-4.32 0.95-3.64 0.82-3.25 30 0.75 G1-1/4 71 1440×1006×1296 740
LGCD-37 VP
1.46-5.83 1.31-5.21 1.11-4.44 1.02-4.01 37 0.75 G1-1/4 73 1440×1006×1296 805
LGCD-45 VP
1.77-7.08 1.58-6.30 1.36-5.43 1.25-4.94 45 1.1 G1-1/4 75 1440×1006×1296 845
LGCD-55 VP
2.33-9.32 2.09-8.33 1.77-7.05 1.58-6.31 55 1.1 G2 75 1600×1200×1650 1260
LGCD-75 VP
3.1-12.31 2.8-11.13 2.44-9.61 2.19-8.74 75 1.1 G2 75 1600×1200×1650 1460
LGCD-90 VP
4.2-16.45 3.6-14.26 3.0-11.72 2.70-10.8 90 2.2 G2 75 2000×1580×1790 1650
LGCD-110 VP
5.1-20.26 4.4-17.48 3.6-14.25 3.3-13.05 110 2.2 G2 78 2540×1700×1900 1850
LGCD-132 VP
5.8-23.08 5.2-20.54 4.5-17.65 4.2-16.05 132 2.2 G2 78 2540×1640×1800 2350
LGCD-160 VP
7.1-28.00 7.1-26.00 6.05-22.00 6.5-18.39 160 3.8 G2-1/2 80 2540×1640×1800 2490
LGCD-200 VP
9.05-36.00 9.05-33.00 7.15-25.00 7.15-21.00 200 7.6 DN80 80 3150×1800×2100 3390
LGCD-250 VP
11.3-45.00 11.3-40.00 9.25-32.00 8.2-28.00 132 7.6 DN80 81 3150×1800×2100 3690
LGCD-280 VP
13.5-49.20 13.5-45.00 11.5-41.30 10.5-38.50 280 11 DN100 81 3450×2000×2200 5790
LGCD-315 VP
15.5-56.50 15.5-50.50 12.5-45.00 12.5-41.05 315 11 DN100 83 3450×2000×2200 6890
Note:
  • The above parameters are for reference only, the final parameters are subject to the drawings. Parameters and colors can be designed according to customers' needs.
  • Air/water cooling, oil content, weight, and external dimensions can be designed according to user requirements and needs, subject to final order and technical agreement.
  • Frequency converters (optional).
  • 1 year warranty for air compressor and 2 years warranty for air end.
  • Tags:
  • variable speed screw compressor
  • oil-injected screw compressor blocks
  • manufacturer of industrial air compressors
Related products
Send Message
Other Products
Inquiry
Inquiry