Benzene, C14-30-alkyl derivatives, YC-HTF-5 CAS:68855-24-3
Request a Quote
Packing: 170kgs/drum, 13.6mts per FCL or as per user’s requirement.
Optimum operating temperature: -25℃ to 300℃
The synthetic heat transfer fluid is suitable for moderate temperature applications. It is designed for use in non-pressurized / low-pressure, indirect heating systems. This heat transfer fluid delivers efficient, dependable, uniform process heat with no need for high pressures.
Specification| Item | Standard | Test Method |
| Appearance | Clear, transparent liquid | Visual test |
| Autoignition temperature ℃ | 330 min | SH/T 0642 |
| Flash point(closed cup) ℃ | 175 min | GB/T 261 |
| Flash point(open cup) ℃ | 180 min | GB/T3536 |
| Sulfur ppm | 10 max | GB/T 3208 |
| Chloride ppm | 20 max | GB 23971 |
| Acid value mg KOH/g | 0.05 max | GB/T 7304 |
| Copper corrosion (100℃,3hr) | ≤1 | GB/T 5096 |
| Moisture mg/kg | 100 max | GB/T 11133 |
| Water soluble acid/alkalis | Not detectable | GB/T 0259 |
| Pour point ℃ | -50 max | GB/T 3535 |
| Density 20℃ kg/m3 | 860-880 | GB/T 1884 |
| Ash m/m % | 0.01 max | GB/T 508 |
| Distillation range Initial boiling point 2%/℃ | Report 325 min | GB/T 6536 |
| Carbon residue m/m % | 0.05% max | GB/T 17144 |
| Kinematic viscosity (mm2/s) 40℃ 100℃ | 15-25 report | GB/T 265 |
| Thermal stability (300℃, 720 hr) Appearance Deterioration rate % | Transparent, no suspended solids or precipitation 10 max | GB/T 23800 |
*The above listed typical data, and test data vary from samples.