Automatic Can Seamer
Request a Quote
Automatic can seamers are used for can sealers, and work in conjunction with can filling machines. STWMF’s can seamers are suitable for a variety of can types, just by changing the dies used.
STWMF provides different automatic can seamer types as shown here:Machine type | Application | Speed level | Max. capacity |
ST-B15 | Food cans | Medium | 400CPM |
ST-B15APH | Aerosol spray cans | Medium | 180CPM |
ST-B6CL | Large cans | Medium | 220CPM |
ST-B15A | Food cans | Medium | 450CPM |
ST-B83A | Food cans | High | 500CPM |
ST-B83AS | Small food cans | High | 500CPM |
ST-C3AL | Food cans, chemical cans | Low | 65CPM |
- Protection design for vacant can feeding. If there are no cans entering the seaming machine, the end feeding system will immediately stop, then resume when cans enter.
- Automatic oil lubricating system for driving parts, which reduces abrasion and improves the service life.
- Stepless variable-speed pulley (speed ratio of 1:3)
- Steam deoxygenation equipment can be installed. Removing oxygen from cans via steam prevents food deterioration.
- Jet printers can be installed for packaging
- Matching with different can filling machine types can be carried out with an adjustment to the installation position and machine speed.
- Cans rotating for seaming with seamer head fixed. Simultaneous multiple can seaming improves efficiency and floor space utilization
- Timing screws are installed at can bases, which can reduce can shaking and avoid material leakage during the seaming process.
- Frequency inverters for convenient speed adjusting
- Non-contact, no can, no cap feeding device and automatic stopping device for insufficient caps.
- Hard chromium plating on the interfaces with cans, thus avoiding abrasion
- Stopping devices ensure machine and operator safety.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos