Gantry Type Die Spotting Press
Request a Quote
This gantry type die spotting press is widely used for grinding during mold production and repairing after mold testing. It can make the spotting process safer and more effective.
Type selection
According to different pressure capacities, we provide 8 different types of machines which vary from 68T to 500T. The floor area of this whole equipment is between 4.42m² - 31.32m², you need take your plant layout into consideration when choosing the right equipment.
Technical parameter
68T-200T Die Spotting Press
Items Model | SX1008-68C | SX1411-100C | SX1613-160C | SX1815-200C | |
Pressure capacity | T | 68 | 100 | 160 | 200 |
Lifting capacity | T | 18 | 28 | 40 | 50 |
Overturn capacity | T | 2.5 | 4 | 8 | 10 |
Ejecting capacity | T | 2.2 | 2.2 | 6.3 | 6.3 |
Dimension of work bench | T | 1000×800 | 1400×1100 | 1600×1300 | 1800×1500 |
Opening stroke of upper workbench | mm | 1000 | 1300 | 1600 | 1800 |
Shift-out stroke of lower workbench | mm | 1840 | 2500 | 2940 | 2940 |
Ejection shroke | mm | 65 | 65 | 250 | 250 |
Overturn angle of upper workbench | ° | 180 | 180 | 180 | 180 |
Maximum weight of mould | T | 4 | 8 | 16 | 20 |
External dimension (length x width x high) | mm | 2600×1700×3900 | 4300×2350×5100 | 4950×2850×5800 | 5800×3000×6100 |
Weight | T | 8 | 18 | 25 | 30 |
300T-500T Die Spotting Press
Items Model | SX2017-300C | SX2618-360C | SX3020-400C | SX3121-500C | |
Pressure capacity | T | 300 | 360 | 400 | 500 |
Lifting capacity | T | 65 | 90 | 120 | 120 |
Overturn capacity | T | 12.5 | 16 | 25 | 30 |
Ejecting capacity | T | 6.3 | 11.2 | 16 | 16 |
Dimension of work bench | T | 2000×1700 | 2600×1800 | 3000×2000 | 3100×2100 |
Opening stroke of upper workbench | mm | 2060 | 2500 | 2500 | 2800 |
Shift-out stroke of lower workbench | mm | 3330 | 3530 | 3890 | 4800 |
Ejection shroke | mm | 250 | 280 | 300 | 300 |
Overturn angle of upper workbench | ° | 180 | 180 | 180 | 180 |
Maximum weight of mould | T | 25 | 32 | 50 | 60 |
External dimension (length x width x high) | mm | 6500×3500×7300 | 6650×4070×7950 | 7050×4200×8300 | 7200×4350×8700 |
Weight | T | 48 | 68 | 80 | 100 |
Note: The technical parameters are subject to change without prior notice.
Features
This gantry type die spotting press is a fundamental type, but the design of every detail still highlights our high requirements for spotting equipment.
- The whole machine is controlled by specialized computer, and adopts a large size display screen to finish operation.
- It adopts MTS digital readout to test the displacement distance for the movable mold base, so the positioning is more precise.
- It has function of automatic fault detection and alerts. It has a mold protection function under low pressure spotting.
- The edge of the mold plate, lower base and central base are all connected, but in traditional spotting processes, the whole surface is in direct contact with each other. In this way, the spotting precision is increased.
Optional device
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos