418KW DEUTZ Water-Cooled Diesel Engine
Request a Quote
View All: http://deutzchbdp.com
Engine Model: BF8M1015C-LA G1A
Rotation speed and power
Gen-set engine performance data | Engine Model: BF8M1015C-LA G1A | |
Control Systems: mechanical / electronic | Power: 388KW(PRP) | No. of cylinder: 8 |
Aspiration Mode: Turbocharged | Inter-cooling Method: CAC | |
Cylinder Type: One-cylinder-one-head | Displacement: 15.874L Cylinder Arrangement: V-form 90° angle |
Rotation Speed Specification | 1500rpm 50Hz |
Power | 418KW(LTP) |
Effective Pressure | 23.1 bar |
MAX. exhaust gas temperature | 540℃ |
Charge air temperature | 220℃ |
Inlet air (25℃/1000mbar) | 1909 m3 /h |
Emission | 2320 kg /h |
Notes: 1.While engine under testing, fan and alternator not included. 2. According: ISO3046-1 |
Engine Data: | 1500rpm | |
Dry weight | kg | 1060 |
Max. engine width | mm | 920.5 |
Max. engine length | mm | 1143.1 |
Bore | mm | 132 |
Stroke | mm | 145 |
Compression ratio | 16.5 | |
Rotation direction (View from flywheel) | Anti-clockwise | |
Flywheel housing | SAE1 | |
Flywheel | 14 " | |
No. of flywheel teeth | 167 | |
Engine support | Rigid | |
Max. noise value at 1m (left and right sides of engine) | dBA | ≤98 |
Power decrease value: By increasing per 100m while exceeding an altitude of 1000m | ≤0.90% | |
Power decrease value: By increasing per 10 ℃ while exceeding a temperature of 30 ℃ | ≤4% | |
Battery voltage | V | 24 |
Starter rated power | kW | 9 |
Generator Capacity | A | 55 |
Generator voltage | V | 28.5 |
Max. exhaust backpressure | mbar | 50 |
Max. allowable air inlet resistance | mbar | 50 |
Turbocharger inlet size | mm | 150 |
Turbocharger exhaust flange connect bolt | 2-4×M10 | |
Turbocharger exhaust flange inner diameter size | mm | 117 |
Lubrication system: | ||
Min. oil pressure at 1500rpm (oil temperature 90℃) | bar | ≥3 |
Min. oil pressure at 600rpm ( oil temperature 90 ℃ ) | bar | ≥1 |
Oil temperature of normal operation | ℃ | < 130 |
Oil consumption rate | <0.3% of fuel consumption | |
Oil pan | Flywheel side | |
Oil pan inclination | ° | 22.5 |
Initial oil filling | L | 48 |
Oil filter element type | Disposable filter | |
No. of oil filter element | 1 | |
Cooling System: | ||
Engine coolant capacity | L | 21 |
Water-pump flow | L/min | 347 |
Water-pump pressure | bar | 1.25 |
Allowable pressure loss of cooling system (include pipeline) | bar | ≤0.35 |
Heat carry off by coolant | kW | 223 |
In & Outlet coolant size | mm | 70 |
Temperature of switch on two thermostats respectively | ℃ | 79/87 |
Temperature of switch on two thermostats totally | ℃ | 94/102 |
Max. allowable operating temperature | ℃ | 103 |
Temperature difference between inlet and outlet coolant | ℃ | ≤8 |
Inter-cooler cooling power | kW | 109 |
Charge air outlet size | mm | 127 |
Fan | Exhaust type | |
Fan connection | Gear drive coupler | |
Fan diameter | mm | 980 |
Air volume of fan | m3/s | 4.6 |
Fan power consumption | kW | ≤14.1 |
Fan transmission ratio | 0.96 | |
Cold starting system: | ||
Lowest ambient temperature of cold starting without assistant (standard configuration) | ℃ | -17 |
Lowest ambient temperature of cold starting with flame preheat plug | ℃ | -32 |
Fuel System: | ||
Cylinder ignition sequence | 1-8-4 -5-7-3-6-2 | |
Idle speed | rpm | 600±50 |
Low-pressure pump oil load capacity | L/h | 190 |
Fuel filter element type | Disposable filter | |
No. of the fuel filter element | 2 |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos