Integrated Surface DTH Drilling Rig, KT5D
Down-the-hole drill rig for open-pit mining
This machine integrates a hydraulic long hole drilling rig and a screw air compressor. With a special design, it can be used for either vertical drilling or angle drilling, which is suitable for drilling blastholes and pre-splitting holes in open-pit mines and stonework sites. Powered by a Yuchai off-road engine that meets China Stage III emission standards, the drilling machine works by activating the compressor and a hydraulic machine through a flywheel and a rear PTO shaft. The machine is equipped with a hands-free rod handling system, a floating clamp, a rod lubrication module and a hydraulic dry dust collector. Angle indicator is also available. As you can see, this machine is highly automated and can be efficiently used in drilling rocks. It is easy to use and convenient to be transported from site to site.
Model | |
Rock hardness | F=6-20 |
Hole diameter | ⌀90-105mm |
Recommended drilling depth | 18m |
Tramming speed | 2.5/4.0km/h |
Gradeability | 25° |
Ground clearance | 430mm |
Total power | 162kW |
Engine | YuchaiYC6J220-T300 |
Free air delivery of compressor | 12m³/min |
Discharge pressure | 210 psi |
Dimensions | 8400 ×2350 ×2700mm |
Total weight | 10000kg |
Rotation speed | 0-120r/min |
Maxium torque | 1.4kN-m |
Maximum push force | 3.5kN |
Boom lift angle | Up: 48°, down: 16° |
Boom swing angle | Right: 40°, left: 38° |
Tilt angle | 147° |
Swing angle | Left: 52°, right: 53° |
Lateral horizontal swing angle | Right: -15°-97° |
Frame oscillation angle | Up: 10°, down: -10° |
Feed length | 3000mm |
Feed extension | 900mm |
DTH hammer | M30H |
Rod diameter | ⌀64×3000mm |
Dust collector | Dry (hydraulic cyclonic laminar flow) |