Full Serial DCVV Control Cabinet
The control function of the full series DCVV control cabinet is achieved by its STEP full serial elevator control system. The elevator control cabinet supports many control modes such as duplex, group control, remote control, etc. By adopting CAN-Bus serial communication, the wiring cost is reduced due to less cable used, while the elevator is safer and more reliable.
The electric drive uses a MENTOR II DCVV speed regulator produced by British CT, and there is no need for electric generator set. By changing the voltage on the brush of the motor, the motor speed can be modulated. Hence, an elevator controlled by the DCVV control cabinet offers a comfortable feeling, improved operation efficiency and reduced energy consumption. The full serial DCVV control cabinet uses an absorption circuit and a DC reactor to greatly reduce the operation noise. Our control cabinet is suitable for different kinds of DC elevators.
Parameters of the Full Serial DCVV Control Cabinet
| Rated elevator speed | Less than 6.3m/s |
| Power range | 15-75kW |
| Power supply | AC 360-460V, 50/60Hz, 3 phase |
| Frequency inverter | CT DC frequency inverter |
| Applicable motor | DC motor |
| Landing method | Direct landing |
| Landing accuracy | Less than ±3mm |
| Machine room heat dissipation | No need |
| Energy saving performance | Greater than 60% compared with electric generator set |
| Safety standard | GB7588, EN-81 |
| Dimension | 800mm*1740mm*382mm |
As a China-based full serial DCVV control cabinet manufacturer, our company also provides VVVF escalator control cabinet, elevator group control system, elevator main controller board, general vector inverter, and more.
