Slitting and Cut-To-Length Line for 6-12mm Thickness
Slitting and Cross-Cutting Line, 6-12mm Slitting and Cut-To-Length Line, Slitting and Cutting Line
The slitting and cut-to-length line is developed for longitudinal and cross cutting of coils, with width of 400-1000 mm and thickness of 4-8mm. There are two kinds of lines by our company on the market, slitting and cut-to-length line with recoilers and slitting and cut-to-length line without recoiler. Thus, before inquiry, please confirm which design you want.
Here shown is the illustrative introduction of slitting and cutting line without recoiler. It is widely used for the manufacture of flat bar strips.
Features of Slitting and Cross-Cutting Line
1. Incredible production capacity
2. Accurate positioning and cutting
3. Compact design with full functions
4. Applicable to produce sheets and flat bars
| No | Item | Unit | Parameters |
| 1 | Control system | PLC control | |
| 2 | Applicable material | Hot rolled coil | |
| 3 | Thickness | mm | 4-8 |
| 4 | Width | mm | 400~1000 |
| 5 | Coil inner dia. | mm | Φ500-800 |
| 6 | Coil outer dia. | mm | ≤2000 |
| 7 | Weight | ton | ≤25 |
| 8 | Dia. of leveling rollers | mm | 180 |
| 9 | Quantity of the leveling rollers | 11 | |
| 10 | Material of leveling roller | GCr15 | |
| 11 | Power of slitting machine | kW | 160 |
| 12 | Power of leveling device | kW | 110 |
| 13 | Total Power | kW | 310 |
| 14 | Material of the cutter | 9CrSi | |
| 15 | Line speed | m/min | ≤25 |
| 16 | Direction | From right to left ( Face the production line) | |
| 17 | Length tolerance | L=2m≤±1 mm | |
| 18 | Diagonal tolerance | L=2m≤±2 mm |
Main Parts
1. Coil car; 2. Double-head Decoiler; 3. Pressing and pinching device; 4. Side-guiding device; 5. Slitter; 6. Scrap winder; 7. Straightening machine; 8. Hydraulic cutter; 9. Stacker table
- Double-head decoiler
- Pressing and pinching device
- Slitter
- Hydraulic cutter
- Stacker table
