Applications of shoulder press machine
The shoulder press machine is mainly used to shape your deltoid muscle, triceps brachii muscle and trapezius muscle.

Configuration of shoulder press machine
● The shoulder press uses a 50 x 100 x 2.5T x R8 rectangular tube with large rounded corners as its main frame, a Ø60/50 x 3.0T circular tube and 40 x 80 x 3.0T flat ellipse pipe as its swing arms, and a 50 x 100 x 2.5T x R8 rectangular tube with large rounded corners as its connecting brace, as well as a drum shaped tube as its weight basket. This design has been streamlined to be the most optimal and attractive to users.

● Because of the polyurethane foaming process and primary PU forming technology, the cushion will not easily deform. In order to ensure it is suitable for just about any body type, the hardness is controlled 65 degrees, plus or minus 5 degrees according to the design of the human body. The cushion is covered with a leather that has undergone extensive testing to ensure there is no fading or ripping even after long term usage.

● The seat auxiliary adjusting system uses a free pull with 5 different adjustment levels with an adjustment stroke of 100mm.

● The balance-weight is made of high quality steel and treated through a rust cleaning and two-time spray coating for additional rust resistance.

● The pedal is made of PVC after foam molding and supported by a steel frame, thus ensuring a comfortable user experience.

● Due to the large knob, it is easy to lock the machine into the desired settings. The knob itself is made of ABS+PC synthetic plastics for additional durability.

● This shoulder press uses ø45mm 45# alloy steel for the guide rail, which is treated with high-temperature processing. The surface is then covered in a chrome plating for additional wear and corrosion resistance, no bending, and exceptional toughness. Due to the arc motion trail, it works in line with natural human kinetics.

● The front guard board is made of transparent matte textured ABS material, with the rear guard board made of an electrostatic spraying ABS texture steel board.

● The pulley is made of the single injection molding engineering plastics.

● The handlebar is made of PVC.

● The bearing is one of the best bearing varieties in China (C&U bearing) with a cap made of injection molding ABS plastic material.

● Weight stacks are made of steel (20# alloy steel) and are designed to be both thin and smooth, so that users find no steel pits or hard spots. There are also shock pads placed between the weight stacks.

● This fitness machine uses hollow stainless steel treated with lapping and polishing processes for the guide bar. The guide bar has also undergone extensive testing, and will not rust easily.

● Weight stack latch: The bar is made of an injection molding ABS material with a latch made of a 304 stainless steel reinforced strong magnetic bolt. Each part is genuine, high quality metal.

● The steel cable uses 6 x 19+1 standard (6 strands of steel wire consisting of 19 wires are twisted together with one main steel wire).Its external diameter is 5.8mm and diameter of the bare rope is 5.8mm with a maximum effective bearing capacity of 1000kg. This ensures the cable is easily able to handle more than 1,000 stretches.

● Training graphs and illustrations are made of PVC plaster and attached using a 3M high viscosity glue to protect it from coming off after exposure to dampness and corrosion.

● The foot cushion is made of single injection molding PVC.

● Scale marks are created through laser cutting and 2mm stainless steel laser lettering.

● The material is A2-70 stainless steel. Some parts are equipped with 12.9 grade alloy steel screws.

All the products from MS are shipped with operating manuals and include installation service. We will send professional installation personnel if conditions allow for it (clearing international travel restrictions). If personnel cannot be sent, operation manuals and installation videos are both offered to customers.