Pulse Jet Baghouse Dust Collector
To remove paper dust from the internal filter media surface with bursts of compressed air, so that outlet air from inertial separator can get cleaned. Main box of the collector is divided vertically into three sections: lower section, middle section, upper section, and a dust hopper is attached at the bottom of the main box. During the cleansing process, dirty air horizontally enters the hopper, where heavy coarse dust falls down directly into. Lighter dust then goes up with the air through the lower and middle section, dust gets drawn against the outer surface of the filter bags, retained and stored, while the cleaned air pass the upper section and get discharged. The pulse jet baghouse dust collector can equip PLC for automated operation of valves to control air outlet, pulse air input and dust discharge automatically.
