Compression Refuse Truck
LMT5070ZYS Compression Refuse Truck
Features of Compression Refuse Truck
1. Stiffening beam and steel plates are welded to form the solid dustbin frame structure, and with a concave bottom and arc surface on the top and sides. Our compression refuse truck features beautiful appearance, light weight and no distortion.
2. The push shovel consists of steel frame and folding panel. With a lightweight structure, it can distribute refuse uniformly and unload completely.
3. The filling device of the compression refuse truck mainly consists of shell, sliding plate, scraper and some other components, and each component adopts beam or box structure. It has solid structure and light weight.
4. The compression and transportation of refuse are finished under a closed state, which eliminates dust flying caused by the airflow during the operation and transportation.
5. There is a special rubber sealing strips between the dustbin and filling device, and sealed by a locking device, which avoid secondary pollution.
6. The control system of our compression refuse truck centralizes all the advantages of electronic, pneumatic and hydraulic systems, which improved the operation reliability.
7. Engine power output is controlled by electronic throttle control system, which ensures that the engine can automatically select acceleration or idle speed according to the operation state of garbage truck. By this design, power loss and system overheating is avoided and fuel consumption reduction is well achieved.
8. This vehicle adopts imported PLC (programmable logic controller) integrated control and logic circuit system to ensure all the operational order executed in sequence, which can reduce accidents caused by misoperation and improve the reliability.
9. An emergency braking button is set up in the compression refuse truck, which can stop operation in any state or any location, thereby ensuring the safety of operator and the equipment itself.
10. It has both automatic and manual operation modes, and the operation control box is installed both in the cab and the rear of vehicle. It is convenient for operation.
11. Users can choose different dump box (bucket) structure according to different refuse collection processes.
Technical Parameters of Compression Refuse Truck LMT5070ZYS
Item | Unit | Parameter |
Overall Dimensions (Length × Width × Height) | mm | 6550×2152×2545 |
Chassis Type | | NKR77LLPACJAY(Euro III) |
Drive Mode | | 4x2 |
Engine Model | | 4KH1-TC |
Engine Power | kW | 96 |
Fuel Type | | Diesel |
Wheelbase/Axle Number | mm | 3360/2 |
Approach/Departure Angle | (°) | 24/17 |
Maximum Total Weight (full-loaded) | kg | 7300 |
Rated Carrying Weight | Kg | 1970 |
Maximum Running Speed | km/h | 100 |
Rated Working Pressure of Hydraulic System | Mpa | 16 |
Dustbin Effective Capacity | m3 | 6 |
Filling Device Capacity | m3 | 0.8 |
Refuse Compression Mode | | Twice Compression and Two-way Compression |
Loading Cycle Time | s | 35 |
Unloading Cycle Time | s | 45 |
Optional Components | | TV monitoring system, wireless remote control, spraying dust suppression system, motor power system, dump box (bucket) mechanism |