MLSG Laser Cutting Machine

MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
MLSG Laser Cutting Machine
Request a Quote

Application
The MLSG laser cutting machine can be used for the following fields: sheet metal processing, automobile manufacturing, case and electric box, fitness equipment, stainless steel kitchen ware, elevator manufacturing, environmental protection equipment, machine manufacturing, electrical appliances manufacturing, petroleum tubular goods, aerospace industry, lighting products etc.

Finished products

Specification
Power: optional 1000W/2000W/2500W/3000W/4000W
Cutting material: carbon steel, stainless steel, aluminum, copper etc.
Applicable plate length: less than 50m
Applicable plate width: 2.0-5.0m (Note: the dimension can also be customized according to the actual requirements of the customers.)

Product parameter
Model MLSG-3000 MLSG-3500 MLSG-4000 MLSG-4500 MLSG-5000 MLSG-5500 MLSG-6000
Cutting width 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Rail span 3.0 3.5 4.0 4.5 4.5 5.0 6.0
Cutting length Effective cutting length≤50m
Z axis stroke 180mm
X/Y axis positioning accuracy ±0.1mm/5m
Maximum speed of single axis 36m/min
Machine speed
NO Item Parameters Note
1 Longitudinal speed (MAX) 36m/min
2 Horizontal speed (MAX) 36m/min
3 Z axis lifting speed (MAX) 30m/min
4 Z axis follow up speed (MAX) 10m/min
Precision specifications
NO Item Parameters Note
1 Homing precision ≤±0.1mm
2 Positioning precision ≤±0.1mm/1000mm
3 Right angle precision ≤±0.5mm (2m*2m)
4 Cutting nozzle sensing precision ≤±0.1mm
5 Cutting width 0.3-0.8mm (according to the plate thickness)
6 Cutting roughness ≤6.3-12.5 um (according to the plate thickness)
7 Cutting slope ≤1°
Cutting specification
NO Material Gas Thickness (MAX) Corresponding cutting speed (reference value)
1 Mild steel O2 22mm 650mm/min
2 Stainless steel N2 12mm 650mm/min
3 Aluminum N2 12mm 400mm/min
Laser specification
Variable range of laser power (W) 200~4000 Gas composition CO2 1.7%; N2 23.4%; He 74.9%
Method DC discharge excited; high speed axial flow type
Laser wavelength (μm) 10.6 Mode TEM00/TEM01
Frequency (Hz) 2000 Laser gas He/N2/CO2
Max input power (KW) 40 Flux of cooling water L/h 160~
Recommended cooling capacity (KW) 38~40 Water temperature (℃) 20~25
Divergence angle (half-angle) (mrad) ≤1.5mrad Laser beam quality (M2) < 1.8~1.9
Pre-heating time (min) 2~2.5 Spot diameter (mm) 22.5
Weight (Kg) 1070 Dimension (L, W, H)(mm) 2360 x690 x 1200
Detail of Robot Plasma Cutting Machine
  • Interface of cutting parameters
  • System operation panel
  • Auxiliary gas input
  • Automatic auxiliary gas switchover
  • Precise double temperature water chiller
  • Laser cutting head
  • High precision mirror base and reflector
Components of laser cutting machine

Longitudinal rail
The longitudinal rail is the main part which can ensure stable running of the machine. It consists of two parallel high precision linear rail. High precision racks are inlaid in-between the two linear rails. The rack is measured by parameter-CP (bottom clearance between gear and rack) which can reduce accumulated error caused by transmission of gear and rack, ensuring the running stability and transmission precision of the cutting machine. The working precision meets the standard DIN8523.
CP 10 rack: processing precision: level 7; processing error: 0.06mm/1000mm.

Longitudinal rack
The rack is measured by parameter-CP which can reduce accumulated error caused by transmission of gear and rack, ensuring the running stability and transmission precision of the cutting machine. The working precision meets the standard DIN8523. CP 10 rack: processing precision: level 7.

Longitudinal drive
The drive is combination of high rigidity precise gear reducer from NEUGART, Germany and FAGOR AC servo motor. It can realize longitudinal machine movement by flexible meshing of gear and rack.

Horizontal drive
There are two sets of horizontal drive units. The main drive and auxiliary drive carries out movement in the same direction according to a certain proportion, so that the optical path will form constant optical system. The drive is combination of high rigidity precise gear reducer from NEUGART, Germany and FAGOR AC servo motor. It can realize horizontal machine movement by flexible meshing of gear and rack.

Aplantic compensation device
The horizontal optical path is in motion during cutting. So the focusing of optical system will be unstable caused by the constant change of the horizontal optical path, thus affecting the cutting quality of the workpiece. This cutting machine adopts aplantic control technique. A group of aplantic compensation units are added on the horizontal moving direction, keeping the optical path length during horizontal movement, thus ensuring the cutting quality.

Cutting torch lifting unit
The cutting torch lifting unit adopts double linear rail guide and precise ball screw as the transmission method, so that the torch lifting is quite stable. It also has dual protection of mechanical position limitation and soft limit to ensure cutting quality and lifting safety of laser cutting torch.

Longitudinal drag chain unit
There is many service cables and air sources which should be lead into the cutting machine along its longitudinal and horizontal moving direction. Because there are more longitudinal cables and gas pipes, the longitudinal movement has quite large moving load which will reduce the running stability and reliability of the machine. So, the longitudinal drive system adopts drag chain servo unit to ensure the longitudinal and horizontal running stability.

Jinfeng introduction
Jinfeng Welding & Cutting Machinery Manufacture Co., Ltd hires senior engineers from ESAB to lead mechanical department, electrical department and software department. There are 80 people in the team in total. They will carry out development and design of various structural steel H beam production lines, so that we have technical guarantee.

Jinfeng has strong production capacity: we have 13 imported CNC machining centers, 3 4mx12m large machining centers, so that the annual output of various assembly machine is 1000.

We have a stable sales team. All the members of the sales team have more than 10 years of experience in service, so that they can provide customers with various consultation and services rapidly, in time and expertly. Our executive vice president leads an after-sales service team of 30 employees, so that they can provide 24-hour after-sales service all year round.

Related products
Send Message
Other Products
Inquiry
Inquiry