Hydraulic Fitting Bolt
Request a Quote
Application
Hydraulic fitting bolts are a new fitting bolt that can be applied to flange couplings. They are normally used in propeller shafts and intermediate shaft, intermediate shaft and intermediate shaft, intermediate shaft and main engine (or reduction gearbox) output shaft connections. The hydraulic fitting bolts can be also used in steam turbine, rolling mill or other adapting pieces with a high torque.
Features
- Hydraulic fitting bolts are convenient and time saving to use. There is no tapping or freezing needed during installation and disassembly. Users only need a hydraulic pump, a hydraulic elongator and simple positioning sleeves
- Hydraulic fitting bolts can be used repeatedly.
Parameters
Nominal aperture d (mm) | Thread m (mm) | Smallest thickness of flange assembly h (min) | Extend long end length l1(mm) | Extend short end length l2 (mm) | Thickness of nut L3 (min) | External diameter of nut d (mm) |
>38-40 | M30×3.5 | 120 | 64 | 55 | 25 | 58 |
>40-44 | M33×3.5 | 125 | 64 | 55 | 27 | 60 |
>44-49 | M36×4 | 138 | 70 | 58 | 29 | 64 |
>49-51 | M39×4 | 143 | 78 | 62 | 31 | 68 |
>51-55 | M42×4.5 | 152 | 83 | 68 | 34 | 74 |
>55-58 | M45×4.5 | 158 | 87 | 70 | 36 | 78 |
>58-62 | M48×5 | 160 | 91 | 72 | 39 | 82 |
>62-68 | M52×5 | 172 | 99 | 78 | 42 | 90 |
>68-73 | M56×5.5 | 184 | 106 | 84 | 45 | 98 |
>73-78 | M60×5.5 | 196 | 114 | 90 | 48 | 102 |
>78-83 | M64×6 | 208 | 122 | 96 | 52 | 112 |
>83-88 | M68×6 | 220 | 128 | 102 | 55 | 118 |
>88-93 | M72×6 | 232 | 134 | 106 | 58 | 126 |
>93-98 | M76×6 | 244 | 140 | 110 | 61 | 130 |
>98-104 | M80×6 | 258 | 146 | 114 | 64 | 138 |
>104-112 | M85×6 | 272 | 154 | 120 | 68 | 148 |
>112-118 | M90×6 | 288 | 162 | 126 | 72 | 155 |
>118-124 | M95×6 | 304 | 170 | 132 | 76 | 164 |
>124-130 | M100×6 | 320 | 178 | 138 | 80 | 172 |
>130-138 | M105×6 | 335 | 186 | 144 | 84 | 182 |
Index
marine bolt, marine accessories
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos