Hydraulic Longhole Drilling Rig, KSJ21
Request a Quote
- Dimensions (L×W×H): 6750×1600×2580/3000mm
- Weight: Approx. 11000kg
- Gradeability: 25%(14°)
KSJ21 hydraulic longhole drilling rig is primarily intended for long hole drilling and bolting operations, and it is suitable for underground mines and tunnels with a height range of 2.9m-5.2m and a width range of 2.8m-4.5m. This hydraulic longhole drilling rig is adaptable for a range of mining applications because of its 360-degree boom rotation capability, swing boom mechanism and guide rail configuration, which allow for 360-degree hole drilling and parallel hole drilling.
Dimensions and weight | ||||
Length | 6750mm | |||
Width | 1600mm | |||
Height | 2580/3000mm | |||
Weight | Approx. 11000kg | |||
Tramming speed on flat ground | 10km/h | |||
Maximum gradeability | 25%(14°) | |||
Safety protection | ||||
Noise level | < 100dB(A) | |||
Lifting safety roof | Meet the requirements of FOPS and ROPS | |||
Air and water system | ||||
Air compressor | 1×JN4 | Oil consumption of lubrication | 180-250g/h | |
Capacity of air compressor | 0.5m³/min | |||
Pressure | 6-8bar | Water pump | 1×CRI10-22 | |
Shank lubrication device | Electronic pulse lubrication pump | Power | 4kW | |
Air consumption of lubrication | 0.3m³/min | Capacity of water pump | 6m³/h | |
Chassis | ||||
Diesel engine | Cummins QSB3.9-C80 60kW/2200rpm | Travelling braking | Wet type brake | |
Exhaust purification | Exhaust catalyzer | Parking braking | Mechanical brake | |
Drive system | Hydraulic torque converter gearbox | Fuel tank | 30L | |
Drilling system | ||||
Rock drill | HC95LQM | |||
Impact power | 24kW | |||
Impact flow | 138L/min | |||
Impact pressure | 200bar | |||
Impact frequency | 58-57 | |||
Torque | 955Nm | |||
Feed extension | 800mm | |||
Electric hydraulic power unit | ||||
Motor | 75kW three-phase motor | |||
Impact/feed/positioning | Variable displacement axial piston pump | |||
Rotation | Gear pump | |||
Filter fineness | 10µ | |||
Hydraulic oil tank | 240L | |||
Hydraulic cooler | Air cooler | |||
Working voltage | 380V | |||
Frequency | 50Hz | |||
Starting method | Star/delta |
- The hydraulic longhole drilling rig is equipped with heavy-duty aluminum feed beam, which is supported by hydraulic cylinders to ensure the smooth drilling operation; The hydraulic guide cylinders are used to ensure that bores are drilled with near perfect straightness;
- Trolley-type control panel offers easy operation and gives operator good visibility, and remote control is optional to improves the operation safety;
- The articulated chassis adopts a hydraulic drive system, and 1.6m wide drilling rig is suitable for small to medium-sized tunnels;
- Stepped piston is used in rock drill (drifter), which helps increase drilling speed, improve the efficiency of impact energy transfer from drill to rock, and reduce the consumption of drilling tools while maintaining the condition of the drill rig;
- The hydraulic longhole drilling rig can realize economical drilling with drill depth of up to 35 meters, optional rod handling system (27 1 rods) allows for one-person operation;
- The hydraulic long hole drilling rig adopts a multi-stage oil cylinder direct propulsion system that is standard for the high-power rock drill, ensuring stable thrust during deep hole drilling.
- The drilling rig is equipped with the original power control valve block from Montabert, France, enabling it to feature automatic impact pressure adjustment, and anti-jamming function. This ensures smooth and accurate hole drilling during the operation.
- Auto-stop device and bottom hole debris clearing function are equipped, automatically stopping pushing and impacting after finishing the drilling process.
- This drilling equipment uses Kaishan brand energy-saving integrated direct-connected screw air compressor for smooth operation and easy maintenance.
- It’s matched with Cummins diesel engine and four-wheel hydraulic drive walking system for stepless speed regulation.
- A multi-disc wet brake and a spring parking brake system are adopted for dual insurance in drilling rig braking.
- The hydraulic drilling rig features compact structure and flexible steering. In addition, its mining articulated chassis is equipped with wheel-side motors for articulated steering with an angle of ±36° and rear axle swing angle of ±6°.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos