Silane Crosslinking Cable Extrusion Line

Request a Quote

Website: http://cableextrusion.com/5-silane-crosslinking-cable-extrusion-line.html

XLPE Insulation Line for Low Voltage & Medium Voltage Cables

This cable extrusion line adopts silane cross-linking technology that can provide great flexibility and superior mechanical performance. For manufacturing silane XLPE insulated cables of voltage higher than 1.8/3(3.6)kV, three layers of conductor screen layer, insulation layer and insulation screen layer are extruded in one step. When the XLPE insulated cables of voltage below 1.8/3(3.6)kV need to be produced, operator can use one extruder from all the three to independently extrude the insulation layer.

Technical Parameters

Voltage class	6kV/15kV or below
Conductor size	25-300mm²
Max. cable diameter	40mm
Cable construction	Conductor screen (inner semiconductor layer) 0.5-2mm	Insulation 2-5.5mm	Insulation screen (outer semiconductor layer) 0.5-2mm
Line speed	0-30m/min
Length of warm water trough	18m
Length of cooling water trough	12m
Arrangement of extruders	Φ65 extruder for conductor screen Φ120 extruder for silane XLPE Φ90 extruder for insulation screen
Electricity	Installation capacity 336kVA	380 V ±10% 50Hz±1%	3 phase 4 wire
Water	Water pressure 0.2-0.6MPa	Water consumption 10m³/h (circulating water from reservoir)

Diagram