Vertical Diode Laser Hair Removal Machine
Request a Quote
The 808nm laser penetrates through the skin to the hair follicles. The laser energy will be absorbed by the pigment in the hair follicles at first. Then it is transformed into heat so as to destroy the hair follicles, which can be used for depilation of all body areas except those around eyes.
This Vertical Diode Laser Hair Removal Machine is a standing device with casters, which is suitable for hospitals and beauty salons.
Laser type | Semiconductor laser |
wavelength | 808 nm/755nm&808nm&1064nm |
Output Mode | Pulse output |
Control Method | Touch control |
Screen Size | 12.1 Inch |
Energy density | 10-150J/cm2 (Deviation≤±2%) |
Pulse width range | 1-400ms |
Spot size | 12*12mm |
Frequency | 1-10HZ |
Light spot surface temperature | 0-30℃ |
Cooling System | Semiconductor+built-in water+AirCooling triple cooling systems+Electroniccooling systems |
Dimension | 570×620×1250mm |
Net weight | 73kg |
Fuse specification | Ø5×25 10A |
Input Power | 2400W |
Power | AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ |
- The electronic cooling system enables the diode laser beauty machine to operate for long periods of time, even at high temperatures.
- The precise cooling effect of the TEC cooling system is applied to the sapphire handle, which can reduce the temperature of the contact area so as to make the depilation process safe and painless.
- Double filter can discharge all impurities and ions out of the water, avoiding the risk of damaging the laser bar.
- The maximum repetition frequency of the hair removing diode laser is 10Hz. Operating with the 12mm * 12mm large light spots, the laser speed is increased to 10 times per second, which can save 20% of the total treatment time.
- The laser output is stable and durable, and can reach 15 million times.
- After the skin is prepared, apply the coupling agent and move the handle vertically for 3-5 times at the hair area at a constant speed.
- Energy should be appropriately adjusted depending on the density of the patient's hair, skin color, and personal endurance.
- It smells like burnt hair
- There will be slight redness in the handling area
- The root of the hair follicles will turn inside out
- The rest of the hair roots can be gently pulled out and the customer feels no pain
- During the treatment, we must protect the patient's eyes from light spots.
- The hair should remain 1-2 mm when the skin is prepared.
- The device should be moved at a uniform speed, and two or three rounds are enough for one area.
- Patients will have thermal and slight tingling feelings during the treatment process. But within an acceptable scope, the higher the energy is, the better effect there will be.
- After treatment, the treatment area should be protected from sunshine. Skin directly exposed to the sun can be treated only after at least two weeks.
- It is not recommended to wash the treatment area with hot water the very day. Sauna's and hot tubs should be avoided for one week.
- Try to avoid spicy foods for three days.
- The treated area should be well hydrated.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos