Single Colour Sole Injection Moulding Machine, LA110U/LA120U
This injection moulding machine is suitable for the production of monochromatic TPU soles, shoe covers and air cushions. Apart from applicable for TPU, this shoe moulding machine can also produce products out of TR, TPR and crystal TPR. In addition, this sole injection moulding machine is equipped with multiple sets of molds to fully meet your production demands.
Item | Unit | | | |
Raw materials | TPU, TR, TPR, PVC | |||
Stations | 10 | 20 | ||
Screw diameter | mm | 60 | ||
Maximum injection volume | CC | 565 | ||
Injection pressure | MPa | 120 | ||
Clamping force | Tons | 120 | ||
Yield | Pairs/hour | 60-150 | 100-240 | |
Mould space | mm | 500*280*170 | ||
Heating power | kW | 8 | ||
Total power | kW | 32.5 | ||
Dimensions | cm | 380*329*250 | 420*350*250 | |
Machine weight | Tons | 6.3 | 6.8 | |
Oil consumption | L | 650 |
-
V type mould structure
-
Drying hopper
-
Mould manipulator
-
Energy-saving hydraulic servo control system
- Large clamping force, high injection pressure;
- Advanced mould locking system, even distribution of clamping force;
-
PLC system with industrial human-machine interface (HMI), easy to use;
-
Block cylinder is designed with special structure, providing heat insulation and leakage resistance performance;
-
Rotary encoder has been installed to ensure accurate quantity control to avoid flashes;
-
In addition to the above-mentioned features, this injection moulding machine is also equipped with several safety components, including:
-
Turn table anti-lift switch
-
Emergency stop butto
-
Safety sign Safety door with photoelectric switch
-
-
Cooling tower
it cools down hydraulic oil and raw materials before they are fed into the injection moulding machine; -
Crusher
it recycles wasted products; -
Vertical mixer
it mixes materials with different colours;
Parts list | ||
Toolbox | / | 1pc |
Allen key | 1.5-10 | 9 sets |
Open-end wrench | 6-24 | 8 sets |
Phillips screwdriver (small) | / | 2pcs |
Phillips screwdriver (large) | / | 1pc |
Adjustable wrench | 250mm | 1pc |
Heating ring | Ø120*80 mm | 2pcs |
Heating ring | Ø70*50 mm | 1pc |
Heating rod | Ø15.8*100 mm | 2pcs |
Proximity switch | Ø 25*25mm | 1pc |
Proximity switch | Ø 12*12mm | 1pc |
Thermoelectric coupling | K type/5M | 2pcs |
Oil seal | / | 2pcs |
Plugging rod | / | 1pc |
Plugging bushing | / | 1pc |
Copper gasket | / | 1pc |
Injection nozzle | / | 1pc |
User manual | / | 1 |