MA Series Heavy Duty Slurry Pump

MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
MA Series Heavy Duty Slurry Pump
Request a Quote
MA Series
    Pump Models Catalog

    Features

    1. Available with only one impeller, the MA series heavy duty slurry pump is a horizontal cantilever unit that allows slurry to enter the pumping chamber from only one suction side.
    2. Another key feature of this horizontal pump is the double-casing design. Parts in contact with the slurry are replaceable and made of high-chrome for maximum resistance to wear and abrasion. Rubber and polyurethane are selected to make liners and impellers, ensuring excellent serviceability, longevity and durability under all conditions.
    3. This series of heavy duty slurry pump offers a variety of impeller options to meet a broad range of operating conditions and customer specific requirements.
    4. The rotating shaft is sealed by way of packing seal. The expeller dynamic seal and other mechanical seal arrangements are among options, too.
    5. A number of pumps can be connected in series for use.
    6. The discharge outlet has 8 positions at 45 degree intervals that can be selected to meet the installation and application requirements.

    Advantages

    Optimized structure is suitable for heavy-duty tasks, ensuring serviceability and longevity.
    The double-casing design of our heavy duty slurry pump allows for axial split. Made of ductile iron, the pump casing is able to withstand major pressure produced within the pumping chamber. Liners are made of wear-resistant materials, and do not stick to the outer casing for ease of maintenance and replacement.

    The slurry pump body is fixed to the pump base or mounting base by several bolts. Users can adjust the clearance between impeller and suction liner easily from underneath the bearing support, or bearing pedestal.

    Packing gland seal, mechanical seal and expeller seal are available to prevent slurry leakage during pumping operation.

    Hydraulic Modeling
    Wet-end components are cast of hard metal or polyurethane. They are able to maintain good hydraulic performance even when the pump is subject to severe wear. This helps the pump achieve optimal levels of pumping efficiency for an extended period. Various impeller designs are available to suit the pump for various pumping applications.

    Shaft Seals
    Packing Seal

    As one of the most commonly used seals for rotating shafts, the packing seal can come with low-flush or full flush arrangement which uses flushing water to prevent media from escaping the pump housing. This kind of seal is suitable for use under all pumping conditions. In situations where corrosive solids or high temperature might be encountered, Teflon or aramid fiber is used as the packing material for the gland. For high abrasion conditions, a ceramic shaft sleeve is available.

    Centrifugal Seal-Expeller
    The combination of impeller and expeller creates the pressure needed to seal against leakage. Together with the gland seal or lip seal which is used as the shut-down seal, this type of seal can handle sealing requirements for applications where full-flush gland seal is impractical due to lack of water on the site, or sealing water is allowed to enter inside the pumping chamber to dilute the slurry.

    Mechanical Seal
    MA series heavy duty slurry pump utilizes a leak-proof mechanical seal design which allows easy installation and replacement. Other types of mechanical seal are among options to suit the slurry pump for various pumping applications.

    We also utilize special ceramic and alloys of high strength and hardness on parts that are subjected to friction. Unique design of and seamless fit between the mechanical seal and seal chamber provides excellent resistance to abrasion and shock that ensures its effectiveness under the toughest conditions.

    Transmissions
    Grease Lubricated Bearing Assembly

    The grease-lubricated bearing assembly houses a large-diameter shaft in its unique bearing cartridge designed specially for heavy-duty tasks. Due to its compact design, the bearing takes up little space while providing minimum vibration and deviation. Grease lubrication minimizes the possibility of oil leakage and little extra maintenance effort is needed. The rotor is easily adjustable. Users can install several rotors operating in series.

    Horizontal Axially-Split Bearing Assembly
    Lubricated by oil, the axially-split bearing assembly features a large-diameter shaft and a short cantilever. It delivers high rigidity, and is unlikely to deform or vibrate even when highly abrasive solids are encountered. The bearing is directly mounted inside the bearing support which can be split into 2 halves along its center line. This mounting method allows for ease of disassembly, inspection and adjustment of bearing. Water cooling system effectively cools down the hot bearing, greatly improving its use life.

    Cartridge Type Oil-Lubricated Bearing Assembly
    Spacious cartridge design allows for the installation of a large-diameter rotating shaft. Built specially to handle heavy-duty tasks, the metric size bearing is lubricated by thin oil. Users can install several bearings operating in series. Compact design and high reliability are 2 major benefits of this bearing for its end users.

    Installation Types
    DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
    CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
    ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
    CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.

    Applications

    Feeding slurry to hydrocyclones or pressure filters, froth floatation, minerals recycling, mine dewatering, desulfurization in power plant, coal washing, metallurgy, pulp and paper manufacture, dredging, and chemical engineering.

    Parameters

    Technical Parameters
    Size: 1"-18"(25-450mm)
    Flow rate: 4-5400m3/h
    Total head: 5-75m

    Components

    PartsMaterialMaterial CodeDescriptionHardness PerformanceApplications
    Wet-end Parts, Expeller,
    Expeller Ring, Stuffing Box
    MetalM0527% High-Chrome Cast IronHRC≥58Erosion resistance is marginally lower than M07 and has corrosion resistance.Used for high wear applications with a slurry pH between 5 and 12.
    M0715% High-Chrome Cast IronHRC≥59Excellent erosion resistance and has higher wear resistance than M05Mining pumps ideal for high impact and high pressure applications, such as pumping slurries with sharp, hard, and coarse solids at high flow rate.
    M1230% High-Chrome Cast IronHRC≥65With abrasion resistance better than M05 and M07.Suitable for highly abrasive pumping applications.
    M3335% Ultra High Chrome Cast IronHRC=35This material has erosive and corrosive resistance in low pH applications. Its abrasion resistance is higher than that of M49.The material can be used to transport oxygenated slurries with pH of not less than 1 such as phosphor-plaster, nitric acid, vitriol, phosphate etc
    M4929% High Chrome Cast IronHRC=43With a certain degree of scour resistance and good corrosion resistance under low pH conditions. Its abrasion resistance is higher than M05. Particularly suitable for use in flue gas desulphurization as well as mild acid applications with pH value no less than 4.
    Wet-end Parts,
    Stuffing Box
    Rubber Natural Rubber Shore(A)=40-55High resistance to abrasion and corrosionAn optimal choice for conveying acid slurry and slurry with fine granular particles at ambient temperature.
     Butyl RubberShore(A)=60Resistance to corrosion, abrasion, and high temperatureIdeal for transporting acid slurry and slurry with fine solid particles at temperatures between 60℃ and120℃.
     HypalonRubber Ultra-high resistance to corrosion and high temperatureSuitable for pumping strong acids and alkalis with temperatures above 100℃.
    Frame Plate, Cover Plate,
    Bearing Housing,
    Slurry Pump Base
    Metal Ductile Cast Iron   
    Shaft Metal1045    
    Shaft Sleeve, Shaft Spacer,
    Lantern Ring, Neck Ring,
    Lantern Restrictor
    Metal  Stainless Steel   
    Related products
    Send Message
    Other Products
    Inquiry
    Inquiry