GFG Series Fluid Bed Dryer
The GFG series fluid bed dryer uses purified and heated air introduced from the bottom of the chamber with a suction fan. Fluidization of raw materials is possible through stirring and negative pressure within the chamber. Moisture is then quickly evaporated and removed for high quality material drying.
Parameters| Items | Specification | |||||||||
| Production capacity | kg | 60 | 100 | 120 | 150 | 200 | 300 | 500 | 1000 | |
| fan | velocity | m3/h | 2361 | 3488 | 4000 | 4901 | 6032 | 7800 | 10800 | 15000 |
| air pressure | mmH2O | 594 | 533 | 533 | 679 | 787 | 950 | 950 | 1200 | |
| power | kw | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 45 | 75 | |
| Power of agitator | kw | 0.55 | 0.55 | 0.55 | 0.55 | 0.75 | 1.5 | 1.5 | 2.2 | |
| mixing speed | rpm | 11 | ||||||||
| Air consumption | kg/h | 141 | 170 | 170 | 240 | 282 | 366 | 451 | 800 | |
| Operation time | min | 15-30 (depends on raw materials) | ||||||||
| Height | mm | 2700 | 2900 | 2900 | 2900 | 3300 | 3800 | 4200 | 5800 | |
1. Filter
2. Sub-high efficiency filter
3. Heater
4. Motor
5. Control cabinet
6. Dust collector
7. Separated wall
8. Air door
9. Fan
10. Silencer
Features
PThe structure of the fluidization bed is round so as to avoid dead corners that would be difficult to clean.
Inside the hopper there is a stirring device in order to avoid agglomeration of raw material.
The granules are discharged through the method of turning over. The discharged system can be custom designed as well.
