Two Colour Sandal Injection Moulding Machine, EA210QV/EA212QV
This sandal injection moulding machine produces single-colour, two-colour, mixed-colour or camouflage foam or non-foam soles, sandals and slippers. All of the footwear can be made out of raw materials like TPR, PVC and PUR. To save time and maximize production rate, this injection moulding machine is equipped with 24 sets of molds and can produce as many as 12 pairs of shoes at a time.
Item | Unit | | | |
Raw materials | TPR, PVC, PUR blowing | |||
Mould structure | V type | V type | ||
Stations | Monochrome 20/ Two colour 10 | Monochrome 24/ Two colour 12 | ||
Screw diameter | mm | 50*2 | ||
Maximum injection volume | CC | 390*2 | ||
Injection pressure | MPa | 100 | ||
Clamping force | Tons | 80 | ||
Yield | Pairs/hour | 80-150 | ||
Mould space | mm | 500*240*280 | ||
Heating power | kW | 6*2 | ||
Total power | kW | 36 | ||
Mechanical Dimensions | cm | 590*380*270 | ||
Machine weight | Tons | 7 | 7.5 | |
Oil consumption | L | 750 |
-
Water cooling system
-
V type mould structure
-
Mould manipulator
-
Energy-saving hydraulic servo control system
- This injection moulding machine has miscellaneous usages;
- The sandal injection machine can be equipped with 24 sets of single-colour moulds with two injection cylinders working separately. In addition, it can be equipped with 12 sets of two-colour molds so as to produce two-colour products;
- Multi-stage injection process allows for the production camouflage soles or slippers;
- Suitable for the production of transparent upper straps and products consisted of different density;
- Screw rods are made through special techniques, ensuring exclusive durability;
- Block cylinder is designed with special structure, providing heat insulation and leakage resistance performance;
-
Powerful air blowing system has been installed, this helps make quality products with 30% less weight;
-
PLC control system coupled with industrial human-machine interface (HMI) enables the injection moulding machine easy to use;
-
PLC control system
-
PLC
-
HMI interface
-
-
Servo motor and automatic mould manipulator are optional to save energy and reduce labour intensity;
-
Multiple safety measures have been taken, including:
-
Safety sign
-
Emergency stop button
-
Rotary table anti-lifting switch
-
To be specific, the safety sign will remind people of potentially dangerous zones; photoelectric switch can timely shut down the injection moulding machine to prevent operators accidentally reach out their hands into it; emergency stop button allows operators to shut down the injection moulding machine when finding something unusual happens; turn table anti-lift switch sends electric signals to shut down the injection moulding machine to prevent the turn table from being separated from the wheel.
Apart from these safety components, this footwear machinery is equipped with other devices. Safety door is installed to allow operators to shut down the injection machine when malfunctions happen; safety net is set up to prevent misoperation.
-
Cooling tower is installed to bring down the temperature of hydraulic oil and raw materials;
-
Crusher is used to recycle used materials;
-
Vertical mixer blends materials with different colours and turn them into the same colour;
-
Air compressor will be connected to the injection moulding machine to supply air;
-
Drying system eliminates water in air so as to avoid bubbles in finished products and make better foam soles;
Parts list | ||
Toolbox | / | 1pc |
Allen key | 1.5-10 | 9 sets |
Open-end wrench | 6-24 | 8 sets |
Phillips screwdriver (small) | / | 2pcs |
Phillips screwdriver (large) | / | 1pc |
Adjustable wrench | 250mm | 1pc |
Heating ring | Ø90*80 mm | 1pc |
Heating ring | Ø65*50 mm | 1pc |
Heating rod | Ø15.8*100 mm | 2pcs |
Proximity switch | Ø 25*25mm | 1pc |
Proximity switch | Ø 12*12mm | 1pc |
Thermoelectric coupling | K type/5M | 2pcs |
Oil seal | / | 2pcs |
Plugging rod | / | 1pc |
Plugging bushing | / | 1pc |
Copper gasket | / | 1pc |
Injection nozzle | / | 1pc |
User manual | / | 1 |