Fully Automatic Reinforcing Mesh Production Line I
Reinforcement Mesh Machine / Automatic Mesh Equipment / Wire Mesh Machine
Features of the Fully Automatic Reinforcing Mesh Production Line I
1. Both line and cross wires are fed from pre-cut wires. Line wires are fed automatically while cross wires are added and distributed automatically from the hopper. A servo motor moves the mesh through the machine.
2. The welding electrodes and transformers are equipped with a water-cooling system to prolong the service life of the wire mesh machine.
3. The welding system is synchronously controlled and the welding transformers can work simultaneously or separately.
4. The main structure of welding machine is motor driven and spring weighted to minimize operating costs.
5. Welding materials include, hot-rolled ribbed bar, cold-rolled ribbed bar, hot-rolled plain bar, cold-rolled plain bar, etc.
6. Can be equipped with turnover, dropping and automatic packaging devices.
Technological processes of the Fully Automatic Reinforcing Mesh Production Line I Technical Parameters of Fully Automatic Reinforcing Mesh Production Line I | Model | GWCD2500 (3-8) | GWCD2500 (5-12) | GWCD3300 (5-12) |
| Quantity of welding spot | 48 | 24 | 32 |
| Width of mesh | ≤2500 mm | ≤2500 mm | ≤3300 mm |
| Wire diameter | 3-8 mm | 5-12 mm | 5-12 mm |
| Length of mesh | ≥1 m | ≥1 m | ≥1 m |
| Transverse bar spacing | ≥50mm | ≥75 mm | ≥75 mm |
| Longitudinal bar spacing | 50-200 mm | 100-300 mm | 100-300 mm |
| Min. power | 200KVA | 200KVA | 200KVA |
| Optimal power | 800 KVA | 1600 KVA | 2000 KVA |
| Welding speed | 40-60t/min | 60-80t/min | 60-80t/min |
| Control system | PLC | PLC | PLC |
Applications
The mesh produced by these production lines are used in engineering projects such as the construction of high-rises, bridges, highways, tunnels, etc.
