WF67Y Metal Bending Hydraulic Press Brake Manufacturer

WF67Y Metal Bending Hydraulic Press Brake

Request a Quote

View All: http://hxmachinetool.com/1-4-metal-bending-hydraulic-press-brake.html

Introduction

The back gauge structure of the WF67K metal bending hydraulic press brake adopts a grinding plate, giving the machine high regulation accuracy and facilitating convenient operation.

Parameters

Model	63T/2500	125T/3200	200T/4000	600T/8000
Nominal Force KN	630	1250	2000	6000
Bed Length mm	2500	3200	4000	8000
Bed Width mm	160	180	220	400
Poles Distance mm	1900	2600	3100	6200
Throat Depth mm	250	320	350	500
Slider Travel mm	120	120	250	300
Die Loading Height mm	345	380	500	630
Slider travel Adjustment mm	100	100	180	250
Cylinder Bore mm	Φ140	Φ190	Φ240	Φ400
Main Power kW	25.5	7.5	11	45
Dimension (L)mm	2600	3200	4000	8400
Dimension (W)mm	1500	1750	2150	3300
Dimension (H)mm	2200	2520	2950	5600

Optional devices

Gooseneck punch
Manual refuel device
Villa mechanical crowning bed
Linear guide type back gauge

Features

The structure of the machine is welded by steel plate, and it is designed by the method of limit elements analysis.
The press brake uses the method of vibration to eliminate the stress on components, making the machine stable and reliable.
The two ends of the synchronization mechanism uses a high accuracy central bearing, and adds an eccentric adjusting mechanism.
We use a PATRIX compensating mechanism to compensate deflection generated by the worktable and slider when running. This increases bending accuracy.
The reducer motivates mechanical blocks inside of cylinder to adjust the bending angle, and the value will be displayed on the stroke counting unit.
There is an adjustment button between the workbench and the wallboard, making it convenient to adjust the bending angle.
There is a remote control valve on the right side of the column, which can adjust the pressure of the main system.
Manual oil pump is installed on the inside of the wall plate.