WH67K(Y) series Metal Hydraulic Press Brake Manufacturer

WH67K(Y) series Metal Hydraulic Press Brake

Request a Quote

View All: http://hxmachinetool.com/1-6-metal-hydraulic-press-brake.html

The WH67K(Y) series metal hydraulic press brake uses a vibration treatment method to eliminate stress on components to increase machine stability and reliability.

H063T
H080T
H100T
H125T

This product has been discontinued and removed from our shelves.

Parameters

Model	Nominal Pressure (kN)	Bed Length (mm)	Bed Width (mm)	Poles Distance (mm)	Throat Depth (mm)	Slider Travel (mm)	Max Opening Height (mm)	Slipper Travel Adjust Length (mm)	Hydro- cylinder Diameter (mm)	Main Motor (kW)	System Pressure（Mpa)	Dimension (L x W x H) (mm)
H063T/2500	630	2500	160	1900	300	120	345	80	Φ140	5.5	22	2600 x 1500 x 2200
H063T/3200	630	3200	160	2600	300	120	345	80	Φ140	5.5	22	3200 x 1500 x 2200
H080T/2500	800	2500	160	1900	300	120	350	80	Φ160	5.5	22	2600 x 1700 x 2320
H080T/3200	800	3200	160	1900	300	120	350	80	Φ160	5.5	22	3200 x 1700 x 2320
H100T/3200	1000	3200	180	2500	320	120	380	80	Φ180	7.5	22	3200 x 1750 x 2420
H100T/4000	1000	4000	180	3100	320	120	380	80	Φ180	7.5	22	4000 x 1750 x 2420
H125T/3200	1250	3200	200	2500	320	120	380	80	Φ200	7.5	22	3200 x 1750 x 2550
H125T/4000	1250	4000	200	3100	320	120	380	80	Φ200	7.5	22	4000 x 1750 x 2600
H125T/5000	1250	5000	200	3800	320	120	380	80	Φ200	7.5	22	5000 x 1750 x 2700
H125T/6000	1250	6000	200	4800	320	120	380	80	Φ200	11	22	6100 x 1750 x 2800
H160T/3200	1600	3200	220	2400	400	200	450	80	Φ220	11	22	3200 x 1850 x 2800
H160T/4000	1600	4000	220	3040	400	200	450	80	Φ220	11	22	4000 x 1850 x 2800
H160T/6000	1600	6000	220	4800	400	200	450	80	Φ220	11	22	6100 x 2000 x 3000
H200T/4000	2000	4000	220	3100	400	200	450	80	Φ240	11	23	4000 x 2150 x 3000
H200T/5000	2000	5000	220	3800	400	200	450	100	Φ240	11	23	5000 x 2150 x 3600
H250T/3200	2500	3200	240	2200	400	200	500	100	Φ280	15	22	3200 x 2200 x 3400
H250T/4000	2500	4000	240	3000	400	200	500	100	Φ280	15	22	4000 x 2200 x 3600

Details

Features

The press brake's structure is made up of welded steel plate and the body is designed using finite element analysis.
The hydro-cylinder is installed behind the machine, lowing the working pressure and increasing load capacity.
There are many location points at right end of the slider，to help the sliderarbitrarily locate and complete a variety of different angles at one time.
The press brake's lower die can be chosen from a selection of deflection compensation die, deflection plate and Villa mechanical compensation structure, ensuring the straightness of the workpiece.