Double Wave Soldering Machine, GSD-WD300S
Request a Quote
Soldering Machinery, Double Wave Solder, Double Wave Soldering System
Technical ParametersItems | Parameters |
Control system | Buttons+PLC (GrandSeed PCBASE wave soldering software V1.0) |
Conveyor motor | 1P AC220V, 60W |
Conveyor speed | 0-1800mm/min |
Conveyor height | 120mm |
Width of board | 30-300mm |
Flux capacity | 6 L |
Length of preheating zone | 600mm |
power of preheating zone | 4.8KW, room temperature-250℃ |
Tin consumption | 180Kg |
Wave height | 0-12mm |
Motor | 3p AC220V,0.18KW |
Pump of holder cleaning system | 1P AC220V, 6W |
Conveyor direction | Left to right |
Soldering angle | 3- 6° |
Pressure of flux | 3-5BAR |
Power supply | AC380V 50Hz (three-phase, five-wire) |
Total power | 3.5KW/15KW |
Machine dimensions | 2660mm(L)*1200mm(W)*1450mm(H) |
Frame size | 1800mm(L)*1200mm(W)*1450mm(H) |
Weight | 655KG |
PLC | MITSUBISHI |
Motor of gearbox | PANASONIC, 60W |
Titanium holder | GrandSeed, 1.5mm thick |
Motor of solder pot | B&M, three-phase, six-pulse, 0.18kw, high temperature resistant |
Motor of cleaning device | TALOW magnetic drive pump, overheat protection, automatic turn on/off |
Cylinder | UNIVER rodless cylinder |
Spray nozzle | Rumina, ST-6 |
Power | MEAN WELL |
Intermediate relay | OMRON MY2 MY4 |
Frequency changer | Delta, 0.4kW |
Heating tube | Taizhan (Infrared porcelain nichrome wire) |
Optoelectronic switch | JORDER |
Proximity switch | FOTEX |
U-shape speed sensor | OMRON |
Solid-state relay | YANGJI, 40A |
Air switch | MITSUBISHI |
AC contactor | SCHNEIDER |
Thermocouple | STELUX, K-type |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos