Tie-on Cable Label
Request a Quote
Tie-on Cable Label, PUR
Model: PUR
This tie-on cable label is a kind of cable identification markers made from thermoplastic polyether polyurethane (PUR), used to identify cables and wire bundles. The tie-on cable label is halogen free, flame retardant, hydrolysis and micro-organism resistant. Our tie-on cable labels adopt raw materials in full compliance with the requirements of UL94-V0, and are provided in form of rolls, facilitating for printing process with thermal transfer printer.
The cable labels can be simply attached to cables and wire bundles by means of cable ties after being removed from the carrier. It is recommended to use thermal transfer printer and WO-80500BK thermal transfer ribbon to satisfy the SAE AS 81531 and MIL-STD-202F printing standards.
Features
- Color: yellow, white
- Material: thermoplastic polyether polyurethane (PUR)
- Operating temperature: -25°C up to 80°C
- Storage: cool and dry in original packaging
Dimensions
Order Code | Color | Pack Size (pcs/coil) | Marker High (mm) | Marker Length (mm) | Printable Range (mm) | ||
High | Length | ||||||
White | 1000 | 10 | 60 | 6 | 42 | ||
White | 1000 | 15 | 75 | 11 | 52 | ||
White | 500 | 25 | 75 | 21 | 52 | ||
Yellow | 1000 | 10 | 60 | 6 | 42 | ||
Yellow | 1000 | 15 | 75 | 11 | 52 | ||
Yellow | 500 | 25 | 75 | 21 | 52 |
Properties | Test Method | Typical Value |
Hardness | DIN 53505 | 58 Shore D |
Density | DIN 53475 | 1.27g/cm3 |
Tensile strength | DIN 53504 | 30MPa |
Ultimate elongation | DIN 53504 | 400% |
Stress at 20% elongation | DIN 53504 | 13MPa |
Stress at 100% elongation | DIN 53504 | 19MPa |
Stress at 300% elongation | DIN 53504 | 33MPa |
Tear strength | DIN 53515 | 110N/mm |
Abrasion loss | DIN 53516 | 30mm3 |
Compression set at room | DIN EN ISO 815 | 30% |
Temperature | ||
Compression set at 70°C | DIN EN ISO 815 | 45% |
Notched impact strength (Charpy) 23°C | DIN EN ISO 179 | 50kj/m2 |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos