Wireless Temperature Monitoring System
For high-voltage electrical equipment, its temperature monitoring points are usually at places with high voltage, big current and strong magnetic field, or even in enclosed locations, thus making it impossible to carry out temperature measurement due to severe electromagnetic noise, high-voltage insulation problem and space limitation.
Given this, our MRD-CW900 wireless temperature monitoring system is especially developed to offer a perfect temperature monitoring solution. The sensors are installed on high-voltage electrical equipment, and they transfer radio frequency signals to receivers so there is no electrical connection between sensors and receivers. In this way, this online condition monitoring equipment fundamentally eliminates the difficulty in realizing timely temperature monitoring.
Feature
1. Thanks to its high reliability, remarkable safety and relatively low price, this online temperature monitor could be directly installed on every high-voltage switch, busbar joint, outdoor transformer or knife switch.
2. Our temperature monitoring system is outfitted with standard communication interface, and the upper computer could record current temperature, thus providing data to decide whether a preventive maintenance shall be conducted for the high-voltage equipment.
Technical Data
1. Sensor number: 32 or 64 pieces
2. Network interface: Industrial RS485 bus interface
3. Power supply: AC220V, DC220V or other values on request
4. Operating temperature: -10℃~ 85℃
5. Storage temperature: -40℃~ 85℃
6. Installation method: Standard 35mm standard guide rail
7. Mounting position: Instrument room
8. Size: 70×48×113cm
- Overall and Installation Dimensions
- Wireless Temperature Sensor
a - Red
b - Black
c - Yellow
d - Green
e - Wireless Receiving Module
f - Alarm Output
g - Power Supply
