JW-LCX1 Vertical Form, Fill and Seal Line,with 12 heads weigher
- Vibratory feeder
- Working platform
- Z-shaped elevating conveyor
- 12 heads weigher
- Free-fall metal detector
- Vertical form fill and seal machine
- Finished product conveyor
The JW-LCX1 vertical form, fill and seal line with a 12 heads weigher is an economic production line composed of the vibratory feeder, working platform, Z-shaped elevating conveyor, 12 heads weigher, free-fall metal detector, vertical form fill and seal machine, and finished product conveyor. It is used to automatically carry out the entire process for feeding, weighing, bag forming, bag filling, bag sealing, label printing and discharging automatically.
The 12 heads weigher is able to count the large piece/bag numbers in the weighing buckets, and drops the target piece/bag numbers after an accurate calculation. This machine is highly recommended for use in processing small bag products with a small weight tolerance.
Applicable bag materials: Composite film with thickness between 0.03-0.15mm, single layer PE film, paper film and more.
Applicable bag types ② 4 side seal pouches
③ Flat bags
④ Back sealed bag
⑥ Gusset bags
⑦ Quad-seal gusseted bags
| Packaging speed (Pack/Min) | 65P/M |
| Film width | 140-320mm |
| Single weighing range | 10-1500g |
| Film thickness | 0.04mm～0.15mm |
| Form fill and seal machine power | 2.5KW |
| Form fill and seal machine voltage | 220V |
| Multihead weigher power | 1200W |
| Multihead weigher voltage | 220V |
Note: The provided parameters are for reference only, and we will manufacture custom vertical form fill and seal lines according to specific product types, weighing range, factory location, and output.
- Check weigher
- Metal Detectors
- Combined metal detector and check weigher
- Thermal Transfer Overprinter
- Count verification machine
- Conveyor equipment
- Accessories
