Mold Temperature Controller, YK-D-15A Series
Request a Quote
The YK-D-15A hot runner temperature controller uses a single control card for independent control over a single temperature stage. Each control card is fully interchangeable.
Functions
- The use of FUZZY PIDD control technology allows this equipment to adapt to different heating modes, even when there are no PID parameters set. This significantly improves the working efficiency.
- An automatic ambient temperature linear compensation enhances the hot runner temperature controller's accuracy.
- Automatic cold junction compensation prevents any errors caused by changes in the environmental temperature.
- Temperature memory function: if the temperature controller is cut off while in a constant temperature condition, the temperature controller will alarm and automatically remember temperature parameters, then maintain the temperature to prevent production downtime loss caused by an open thermocouple.
- Alarms and protection functions.
Unique advantages
- Alarm for wrong connections in the hot runner power lines and temperature controller lines. This is one of Yikai's patented technology pieces, ensuring customers can prevent production losses caused by a shorted thermocouple.
- Alarm for neutral wire loss or incorrect connections of the neutral wire or live wire. The YK-D-15A hot runner temperature controller effectively eliminates economic losses caused by shorted temperature controllers.
Technical specifications
Item | Spec. |
Supply voltage | 185-250VAC |
Frequency range | 50-60HZ |
Operating temperature | -20—60℃ |
Storage temperature | -30—70℃ |
Fuse | 16A10×38mm |
Thermocouple | Type J or Type K (software selectable) |
Temperature range | 45—537℃ |
Sample rate | 0.1S |
Measurement accuracy | 0.1℃ |
Temperature control accuracy | ±0.5℃ |
Control modes | PIDD or PID |
Output power | 0—3.6KW |
Default setting
Item | |
Thermocouple | Type J |
Upper limit of high temperature alarm | 30℃ |
Lower limit of low temperature alarm | -30℃ |
Temperature unit | Degrees Celsius, ℃ |
Control mode | PIDD |
Soft start | ON |
Product gallery
- YK-D-15A-1 L250*W120*H230mm
- YK-D-15A-(2-3) L250*W320*H230mm
- YK-D-15A-4 L300*W320*H230mm
- YK-D-15A-(5-6) L400*W320*H230mm
- YK-D-15A-8 L500*W320*H230mm
- YK-D-15A-(9-10) L350*W320*H430mm
- YK-D-15A-(11-12) L400*W320*H430mm
- YK-D-15A-(13-18) L400*W320*H730mm
- YK-D-15A-(19-24) L500*W320*H730mm
- YK-D-15A-(25-30) L600*W320*H730mm
- YK-D-15A-(31-36) L720*W320*H730mm
All models shown above are standard mold temperature controllers. Customized options are available upon request.
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos