, BHR Series
The BHR series tri-lobe Roots blower combines into one unit a variety of desirable features commonly found in competitive rotary lobe blower products. The in-house developed rotary lobe blower runs very quietly, thus causing little noise pollution to the surrounding environment. Leak-free and available in a total of 11 models, the BHR series Roots blower provides a finely graded selection of air volumes, and is able to bring pressure up fast.
Features of Tri-Lobe Roots Blower
1. Spiral air baffles wind their way through the air inlet and outlet. Sealed pockets, triangular in shape, are formed between lobes' outer edges and the casing. As rotors revolve, those sealed cells gradually open their way into the inlet or discharge end, allowing air or gas to pump in or out. Because sealed pockets are opened progressively rather than abruptly, they allow air or gas to stream in or out in a continuous manner without generating pulsating flows (also known as pulses).
2. Each rotor has three lobes shaped like a clover leaf. Rotors rotate in opposite directions, allowing lobes to mesh without making physical contact with each other.
3. Top quality precision CNC machine tools are used to produce these rotors which are then put through the dynamic balance test to minimize unwanted vibration.
4. High-precision gears are durable and quiet running.
5. V-belts and bearings are purchased overseas to ensure quality.
6. All moving parts are properly lubricated and sealed off against the chamber to avoid air or gas contamination.
7. Shaft end is tightly sealed against leaking outside.
8. Compact design takes up little space. Optimized design and configuration allows easy maintenance.
- Cylinder
- DOOSAN Machining Center
- Gearbox
- Motor Head-plate
- Rotor Machining
- Pulley
BHR Series Specifications
Pressure: 10~80kPa
Flow rate: 0.4~135 m³/min
Shaft power: 0.3~209.9kW
Diameter: DN50-DN300
Technical Parameters Standard accessories | Main blower, filter, silencer, blower base, belt pulley, belt, guard, flexible connector, pressure and vacuum gauge, relief valve, check valve, anchor bolt, lubricant |
Optional accessories | Motor, starter, acoustic shield, unloading valve, damper, thermometric element, etc. |
Technical Parameters
BHR50 Model | BHR50 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 78.4kpa (588mmHg) | Motor power | 0.55~5.5kw | Diameter | 40mm (air intake) 50mm (air outlet) |
Flow rate (NTP,WET) | 0.43~2.48 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 0.3~4.52kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 72kg (direct drive) 70kg (belt drive) | Acoustic shield | Optional |
BHR65 BHR65
Model | BHR65 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 78.4kpa (588mmHg) | Motor power | 0.55~7.5kw | Diameter | 50mm (air intake) 65mm (air outlet) |
Flow rate (NTP,WET) | 0.7~3.64 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 0.38~5.96kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 84kg (direct drive) 81kg (belt drive) | Acoustic shield | Optional |
BHR80 Model | BHR80 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 78.4kpa (588mmHg) | Motor power | 2.2~11kw | Diameter | 65mm (air intake) 80mm (air outlet) |
Flow rate (NTP,WET) | 2.04~5.43 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 1.04~8.84kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 132kg (direct drive) 123kg (belt drive) | Acoustic shield | Optional |
BHR100 Model | BHR100 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 78.4kpa (588mmHg) | Motor power | 2.2~18.5kw | Diameter | 80mm (air intake) 100mm (air outlet) |
Flow rate (NTP,WET) | 2.87~9.07 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 1.35~15.65kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 168kg (direct drive) 157kg (belt drive) | Acoustic shield | Optional |
BHR125 BHR125
Model | BHR125 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 78.4kpa (588mmHg) | Motor power | 2.2~30kw | Diameter | 100mm (air intake) 125mm (air outlet) |
Flow rate (NTP,WET) | 5.01~12.48 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 1.65~22.03kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 245kg (direct drive) 235kg (belt drive) | Acoustic shield | Optional |
BHR150 Model | BHR150 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 78.4kpa (588mmHg) | Motor power | 2.2~55kw | Diameter | 125mm (air intake) 150mm (air outlet) |
Flow rate (NTP,WET) | 9.84~27.05 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 3.85~51.4kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 408kg (direct drive) 394kg (belt drive) | Acoustic shield | Optional |
BHR175 Model | BHR175 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 58.8kpa(441mm Hg) | Motor power | 11~75kw | Diameter | 150mm (air intake) 200mm (air outlet) |
Flow rate (NTP,WET) | 19.65~40.5 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 9.13~52.03kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 420kg (direct drive) 435kg (belt drive) | Acoustic shield | Optional |
BHR200 BHR200
Model | BHR200 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 78.4kpa (588mm Hg) | Motor power | 11~110kw | Diameter | 175mm (air intake) 200mm (air outlet) |
Flow rate (NTP,WET) | 26.3~58.8 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 11.26~102.4kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 900kg (direct drive) 860kg (belt drive) | Acoustic shield | Optional |
BHR225 Model | BHR225 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 58.8kpa (441mmHg) | Motor power | 30~110kw | Diameter | 200mm (air intake) 250mm (air outlet) |
Flow rate (NTP,WET) | 49.6~76.3 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 23.7~95kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 1430kg (direct drive) 1220kg (belt drive) | Acoustic shield | Optional |
BHR250 Model | BHR250 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 78.4kpa (588mmHg) | Motor power | 37~185kw | Diameter | 250mm (air intake) 250mm (air outlet) |
Flow rate (NTP,WET) | 59.8~96.5 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 28.8~154.3kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 1708kg (direct drive) 1653kg (belt drive) | Acoustic shield | Optional |
BHR300 BHR300
Model | BHR300 | Product series | BHR | Product type | Tri-lobe Roots blower |
Pressure | 78.4kpa (588mmHg) | Motor power | 37~225kw | Diameter | 300mm (air intake) 300mm (air outlet) |
Flow rate (NTP,WET) | 86.1~135.9 m³ /min | Frequency | 50HZ,60HZ | Dimensions | PDF |
Shaft power | 32~209.9kw | Voltage | 380V,400V,415V | Drive method | Belt or coupling |
Cooling mode | Air cooling | Weight (not including motor) | 2198kg (direct drive) 2132kg (belt drive) | Acoustic shield | Optional |
Note
This series of Roots blower offers two drive methods: direct drive and belt drive.
Speak to one of our engineers who truly care about your satisfaction when it comes to the air-cooled Roots blower. Based on your specific requirements, we can select the right lobe blower and provide a reasonable price quote.
Please send to us the following information:
1. Pump capacity(m3/min)
2. Pressure (KPa)
3. Motor power (kw)
4. Specific application environments
In case you have any questions, let us know.
We're sincerely looking forward to a fruitful partnership with you.