CU/XLPE/PVC/SWA/PVC 0.6/1kV Multicore armored cable Manufacturer

CU/XLPE/PVC/SWA/PVC 0.6/1kV Multicore armored cable

Request a Quote

View All: http://tongdacables.com/3-2-2-1-kv-n2xry-cable.html

Multicore XLPE insulated PVC sheathed armored cable with copper conductor

Construction：

Conductor - Plain annealed class 2 stranded (compacted) copper
Insulation - Cross linked polyethylene (XLPE)
Filler - Non-hygroscopic material
Binder tape - Non-hygroscopic material tape
Inner sheath - Polyvinyl chloride compound (PVC)
Armor - Galvanized steel wires
Binder tape - Non-hygroscopic material tape
Outer sheath - Polyvinyl chloride compound (PVC)

Application:

Multicore armored cables are used for main power supply in low voltage distribution power networks. These lines can be installed in ducts, indoors or outdoors, in dry or wet locations. They are recommended for direct burial in the place that requires high electricity and mechanical protection.

Cross section:

2C1.5~2C400mm²
3C1.5~3C400mm²
4C1.5~4C400mm²
5C1.5~5C400mm²
2C E2.5~2C E400mm²
3C E2.5~3C E400mm²
4C E2.5~4C E400mm²

Temperature characteristics:

Conductor operating temperature: -15℃~70℃
Min. installation temperature: 0℃
Conductor emergency operating temperature: 105℃
Conductor short-circuit operating temperature (5s): 250℃

Electrical characteristics:

Rated voltage: 0.6/1 (1.2) kV
High voltage test: 3.5kV / 5min

Color:

Insulation: According to customer requirements
Outer sheath: Black or according to customer requirements

Standard:

Cable design: IEC 60502-1 or AS/NZS 5000.1
Conductor: IEC 60228 or AS/NZS 1125