Angle Roll, W24S-75
Our W24S-75 angle roll, with up to 5m/min bending speed and 75cm3 max. section bending modulus, is capable of bending various profiles and tubes including angle steels, U steels, H steels, round tubes, square tubes, rectangular tubes, etc. Separate design of hydraulic power station and main bending unit ensures small vibration, low noise and easy maintenance. The hydraulic bending machine is also provided with a stand alone control panel, allowing operators to easily move it, thus ensuring high flexibility in operation.
Features of the Angle Roll
1. Each of the two lower rollers can conduct pre-bending, thus saving materials considerably.
2. Due to a displacement sensor, the two side rollers' positioning information can be precisely displayed on the control panel. Display precision is up to ±0.15mm.
2. All three rollers are individually driven by hydraulic motors. They can rotate at both clockwise and counter clockwise directions.
3. The guide rollers with 3-Axes (for forward-backward, up-down and left-right movements) are driven by hydraulic cylinders, providing convenience to control section deformation and bending precision.
4. All actions of the metalworking machinery are driven by a motorized hydraulic power unit that.
5. The profile roll can be operated horizontally or vertically to match your specific bending needs.
5. Tooling can be customized according to customer's section specifications. Tempering and hardening treatment are enforced to ensure high surface hardness and wear resistance.
| Model | W24S-75 | ||
| Max. bending modulus of section (cm3) | 75 | ||
| Bending speed (m/min) | 5 | ||
| Yield limit of material ( MPa ) | 245 | ||
| Inward bending of angle steel | Maximum cross section (mm) | 120×12 | |
| Minimum bending diameter (mm) | 2000 | ||
| Minimum cross section (mm) | 38×4 | ||
| Minimum bending diameter (mm) | 600 | ||
| Outward bending of angle steel | Maximum cross section (mm) | 120×12 | |
| Minimum bending diameter (mm) | 1600 | ||
| Minimum cross section (mm) | 38×4 | ||
| Minimum bending diameter (mm) | 700 | ||
| Outward bending of channel steel | Channel steel model | 25 | |
| Minimum bending diameter (mm) | 1100 | ||
| Inward bending of channel steel | Channel steel model | 25 | |
| Minimum bending radius (mm) | 1600 | ||
| Plane bending of flat steel | Maximum cross section (mm) | 220×40 | |
| Minimum bending diameter (mm) | 1000 | ||
| Vertical bending of flat steel | Maximum cross section (mm) | 110×40 | |
| Minimum bending diameter (mm) | 1100 | ||
| Bending of round pipe | Maximum cross section (mm) | 114×5 | |
| Minimum bending diameter (mm) | 1200 | ||
| Bending of round bar | Maximum cross section (mm) | 85 | |
| Minimum bending diameter (mm) | 100 | ||
| Bending of square pipe | Maximum cross section (mm) | 90×8 | |
| Minimum bending diameter (mm) | 1600 | ||
Related Names
Hydraulic Profile Steel Bending Machine
