Angle Roll, W24S-100
Designed to bend various profiles and tubes including angle steels, channel steels, H steels, flat steels, round steel tubes, square steel tubes, rectangular steel tubes, etc., our W24S-100 angle roll delivers high bending efficiency, accuracy and save you materials and energy. The 3-roll bending machine with digital display system boasts independent control panel and hydraulic power unit which provide high flexibility in operation.
Features of the Angle Roll
1. Bending dies or tooling can be tailored according to customer's profile size. Due to tempering and quenching treatment, they offer desired surface hardness and wear resistance.
2. Two lower rolls can rotate around a fixed center for pre-bending the profiles.
3. This metal forming machine is equipped with a displacement sensor (grating ruler), ensuring that positions of the two lower rolls can be precisely monitored and displayed on the control panel. Accuracy is up to ±0.15mm.
4. The guide rollers with 3-Axes for forward-backward, up-down and left-right movements are driven by hydraulic cylinders and controlled via the control console, convenient for controlling profile deformation and bending precision.
5. All three rollers are individually driven by hydraulic motors, and they can conduct clockwise and anti-clockwise rotation.
6. All actions of the angle roll are powered by the hydraulic power station.
7. The section bending machine operates in both horizontal and vertical orientations.
| Model | W24S-100 | ||
| Max. bending modulus of section (cm3) | 100 | ||
| Bending speed (m/min) | 5 | ||
| Yield limit of material ( MPa ) | 245 | ||
| Inward bending of angle steel | Maximum cross section (mm) | 140×16 | |
| Minimum bending diameter (mm) | 2500 | ||
| Minimum cross section (mm) | 40×5 | ||
| Minimum bending diameter (mm) | 720 | ||
| Outward bending of angle steel | Maximum cross section (mm) | 140×16 | |
| Minimum bending diameter (mm) | 1800 | ||
| Minimum cross section (mm) | 45×5 | ||
| Minimum bending diameter (mm) | 760 | ||
| Outward bending of channel steel | Channel steel model | 28 | |
| Minimum bending diameter (mm) | 1100 | ||
| Inward bending of channel steel | Channel steel model | 28 | |
| Minimum bending radius (mm) | 1700 | ||
| Plane bending of flat steel | Maximum cross section (mm) | 250×40 | |
| Minimum bending diameter (mm) | 1200 | ||
| Vertical bending of flat steel | Maximum cross section (mm) | 120×40 | |
| Minimum bending diameter (mm) | 1300 | ||
| Bending of round pipe | Maximum cross section (mm) | 159×5 | |
| Minimum bending diameter (mm) | 2000 | ||
| Bending of round bar | Maximum cross section (mm) | 90 | |
| Minimum bending diameter (mm) | 1100 | ||
| Bending of square pipe | Maximum cross section (mm) | 100×10 | |
| Minimum bending diameter (mm) | 2000 | ||
Related Names
Iron Tube Rolling Machine | Steel Tube and Pipe Rolling Machine | Square Tube and Pipe Rolling Machine
