Angle Roll, W24S-140
Efficient, precise and material saving, our W24S-140 angle roll provides the optimal solution for various kinds of profiles bending, with the maximum bending modulus of section up to 140cm3. This hydraulic profile bending machine comes with excellent wear resistance and is suitable for high demanding works.
Features of the Angle Roll
1. Excellent solution for bending angle, flat, channel and H steels, round tubes, square tubes, round bars and special sections;
2. All three rollers driven individually and hydraulically;
3. Two lateral Guide Rolls with 3-Axes (for forward-backward, up-down and left-right movements) driven by four hydraulic cylinders, ensuring a capability to prevent deformation of bended profiles.
4. Centralized control of electrical system;
5. Digital type metal bending machine designed with digital display to monitor two lower rolls' positions, enabling high bending precision and easy operation.
6. Bending dies customizable according to section size. Tempering and quenching treatments carried out for high surface hardness and wear resistance.
| Model | W24S-140 | ||
| Max. bending modulus of section (cm3) | 140 | ||
| Bending speed (m/min) | 5 | ||
| Yield limit of material ( MPa ) | 245 | ||
| Inward bending of angle steel | Maximum cross section (mm) | 150×16 | |
| Minimum bending diameter (mm) | 2400 | ||
| Minimum cross section (mm) | 50×5 | ||
| Minimum bending diameter (mm) | 1000 | ||
| Outward bending of angle steel | Maximum cross section (mm) | 150×16 | |
| Minimum bending diameter (mm) | 2200 | ||
| Minimum cross section (mm) | 50×5 | ||
| Minimum bending diameter (mm) | 800 | ||
| Outward bending of channel steel | Channel steel model | 30 | |
| Minimum bending diameter (mm) | 1200 | ||
| Inward bending of channel steel | Channel steel model | 30 | |
| Minimum bending radius (mm) | 1700 | ||
| Plane bending of flat steel | Maximum cross section (mm) | 280×50 | |
| Minimum bending diameter (mm) | 1300 | ||
| Vertical bending of flat steel | Maximum cross section (mm) | 150×40 | |
| Minimum bending diameter (mm) | 1500 | ||
| Bending of round pipe | Maximum cross section (mm) | 168×6 | |
| Minimum bending diameter (mm) | 2000 | ||
| Bending of round bar | Maximum cross section (mm) | 100 | |
| Minimum bending diameter (mm) | 1200 | ||
| Bending of square pipe | Maximum cross section (mm) | 125×10 | |
| Minimum bending diameter (mm) | 2500 | ||
Related Names
Flange Rolling Machine
