Angle Roll, W24S-180
Up to 180cm3 bending modulus of section, profile top pre-bending capability, high working efficiency and bending accuracy are what the W24S-180 angle roll brings to your works in bending various types of steel profiles and tubes. Bending dies in different specifications can be made to fit your specific profiles. As a leading manufacturer of industrial roll benders, Juli offers efficient, precise and economical solutions for section bending.
Features of the Angle Roll
1. The working roll is driven by hydraulic motor to rotate and the two side rolls are driven by hydraulic cylinders to do planetary movement around the central shaft.
2. Hardened steel guide rolls are driven by hydraulic cylinders to move up and down, left and right, forward and backward. This makes sure that profiles deformation during bending can be avoided and thereby ensures bending precision.
3. The metal bender employs a famous brand wideband motor that comes with remarkable insulation property. To be specific, the insulation grade of the motor is up to 8.
4. Three individually and hydraulically driven rollers of angle roll guarantee a high bending capacity.
5. All bending dies of the hydraulic section bending machine experience surface quenching and tempering treatment. The depth of quenching at single face is up to 5mm, and the surface hardness reaches HRC45 or 55.
| Model | W24S-180 | ||
| Max. bending modulus of section (cm3) | 180 | ||
| Bending speed (m/min) | 5 | ||
| Yield limit of material ( MPa ) | 245 | ||
| Inward bending of angle steel | Maximum cross section (mm) | 160×16 | |
| Minimum bending diameter (mm) | 2600 | ||
| Minimum cross section (mm) | 50×6 | ||
| Minimum bending diameter (mm) | 1200 | ||
| Outward bending of angle steel | Maximum cross section (mm) | 160×16 | |
| Minimum bending diameter (mm) | 2000 | ||
| Minimum cross section (mm) | 50×6 | ||
| Minimum bending diameter (mm) | 1000 | ||
| Outward bending of channel steel | Channel steel model | 32 | |
| Minimum bending diameter (mm) | 1500 | ||
| Inward bending of channel steel | Channel steel model | 32 | |
| Minimum bending radius (mm) | 1800 | ||
| Plane bending of flat steel | Maximum cross section (mm) | 300×50 | |
| Minimum bending diameter (mm) | 1500 | ||
| Vertical bending of flat steel | Maximum cross section (mm) | 180×30 | |
| Minimum bending diameter (mm) | 2000 | ||
| Bending of round pipe | Maximum cross section (mm) | 168×8 | |
| Minimum bending diameter (mm) | 2000 | ||
| Bending of round bar | Maximum cross section (mm) | 110 | |
| Minimum bending diameter (mm) | 1300 | ||
| Bending of square pipe | Maximum cross section (mm) | 140×10 | |
| Minimum bending diameter (mm) | 3000 | ||
Related Names
H Steel Rolling Machine | Channel Steel Rolling Machine
