Rubber Sandblast Hose
Request a Quote
The rubber sandblast hose is often used in sandblasters to help remove rust. It acts to deliver the pressurized sand or iron balls.
Characteristics
The inner layer of the rubber hose is wearing resistant. The outer layer offers good ageing and wearing resistance.
The burst pressure of the sand blasting hose is at least four times of its working pressure.
Specifications of the Rubber Sandblast Hose| Inside Diameter (mm) | Outside Diameter (mm) | Cord Thread Layer | Working Pressure | Standard Length | Max. Length | |||
| Nominal Size | Tolerance | Nominal Size | Tolerance | m | Tolerance | m | ||
| Mpa (kgf/cm2) | ||||||||
| 19 | ±0.4 | 34 | ±0.8 | 2 | 1.0 (10) | 20 | ±1% | 60 |
| 22 | ±0.4 | 36 | ±0.8 | 2 | 1.0 (10) | 20 | ±1% | 60 |
| 25 | ±0.6 | 39 | ±1.2 | 2 | 1.0 (10) | 20 | ±1% | 60 |
| 32 | ±0.6 | 50 | ±1.2 | 4 | 1.0 (10) | 20 | ±1% | 60 |
| 38 | ±0.8 | 56 | ±1.5 | 4 | 1.0 (10) | 20 | ±1% | 60 |
| 51 | ±0.8 | 70 | ±1.5 | 4 | 1.0 (10) | 20 | ±1% | 60 |
| 64 | ±1.0 | 82 | ±1.5 | 4 | 0.63 (6.3) | 20 | ±1% | 40 |
| 76 | ±1.0 | 95 | ±1.5 | 4 | 0.63 (6.3) | 20 | ±1% | 40 |
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
