W-Rack PV Mounting System
The W-rack PV mounting system is designed for PV power stations with a concrete structure and ground screw foundation. They are also used for solar power applications with framed or unframed solar battery components.
The lowest point of the mount is at least 0.6m above the ground, allowing for crop growth in agricultural installations. The mounting system also avoids completely blocking sunlight for plants.
According to different working conditions, our PV mounting systems undergo a series of statics analysis and optimization processes for their materials. All stability tests are conducted in compliance with industry standards.
All components and parts of our mounting system are produced from 6005-T5 aluminum alloy and 304stainless steel, providing a guaranteed long working life.
- Main Components and Parts A. Middle clamp kit
Thickness of applicable components: 35mm-52mm
Installing method: Horizontal or vertical
Material: AL6005-T5& SUS304B. Endclamp kit
Thickness of applicable components: 35mm-52mm
Installing method: Horizontal or vertical
Material: AL6005-T5& SUS304C. Rail 60X60, 60X80, 60X100
Weight per meter: 1.252kg/m, 1.477kg/m, 1.842kg/m
Material: AL6005-T5
Tension value: 235N/m2
Thickness of the anodic oxidation: >12μmD. Rail connector 60/60, rail connector 60/60 II
Material: AL6005-T5& SUS304 - Technical Parameters
Application: Open ground
Wind load: <42m/s
Snow pressure: 1.4kN/m2
Component types: With frame; without frame
Length requirement: According to actual conditions
Installing method: Horizontal, vertical
Inclined angle: 0° - 45°
Height: About 0.6 m
Standards:
AS/NZS 1170
DIN 1055
JIS C 8955: 2011
Color: Natural color
Lifespan: 10 years
E. W-rack mounting system
Tolerance of height adjustment: 30mm
Tolerance of north-south direction adjustment: 40mm
Applicable foundation: cement foundation or ground screw
