Flat Tap Thermostatic Bath Mixing Valve
Material
The main body of the flat tap thermostatic bath mixing valve is made of HPb59-1 (grade A brass).
Faucet handwheel is made of fully plated zinc alloy to be corrosion-resistant.
Chrome dual handle is conducted 24H acid test.
The copper thermostatic cartridge is beneficial to inhibit the bacteria from growing.
This plated product is anti-oxidation and corrosion resistant.
The available products include: the ABS made ultra-thin handheld shower (single-sided plating), the φ19*700 stainless steel shower pipes and the double button hose of 360° anti winding .
The net weight is 2.7kg.
Performance
Except for the thermostatic left handle, it uses anti-scald technology (with insulation layer to weaken heat conduction keeping the metal surface of anti-scald).
The temperature difference is within 2℃ when the pressure ratio of the hot water to the cold water is 10:1.
The switch is of pulling rod type which is easy to quickly switch by pulling up and down.
Available standards:
BS EN1111, BS EN1287, ASME A112.12.1/CSAB 125.1, ASSE 1016 and AS 4032.2.
Under the pressure of 0.3±0.03MPa, the water flowrate is:
Shower
When the supply water is only cold water: 17.2L/min
34℃: 18.1L/min
38℃: 18.3L/min
42℃: 18.3L/min
When the supply water is only hot water:17.4L/min
Bathtub
When the supply water is only cold water:19.5L/min
34℃: 21.2L/min
38℃: 21.4L/min,
42℃: 21.5L/min
When the supply water is only hot water:19.7L/min
