Fence Mesh Welding Machine II
Fence Panel Welder / Fence Welder / Mesh Welder
Features of the Fence Mesh Welding Machine II
1. Both line and cross wires are fed from pre-cut wire. Line wires are fed automatically while cross wires are fed from the hopper. The fence welder uses a servo motor to pull the mesh repeatedly. This leads to great efficiency and high capacity output.
2. The welding electrodes and transformers are equipped with a water-cooling system to prolong the service life of the wire welder.
3. The welding system uses synchronous power control for simultaneous or separate operation with great efficiency.
4. The welding machine utilizes a spring weighted motor drive for low cost operation.
5. Welding material can be hot-rolled ribbed bar, cold-rolled ribbed bar, hot-rolled plain bar, cold-rolled plain bar, etc.
Technological processes of the Fence Mesh Welding Machine II Technical Parameters of Fence Mesh Welding Machine II | Model | GWCD1200 | GWCD1600 | GWCD2100 | GWCD2500 |
| Quantity of welding spots | 24 | 32 | 40 | 48 |
| Width of mesh | ≤1200 mm | ≤1600 mm | ≤2100 mm | ≤2500 mm |
| Wire diameter | 3-5/4-8 mm | 3-5/4-8 mm | 3-5/4-8 mm | 3-5/4-8 mm |
| Length of mesh | 3.5, 5.5, 7.5m | 3.5, 5.5, 7.5m | 3.5, 5.5, 7.5m | 3.5, 5.5, 7.5m |
| Transverse wire spacing | ≥50mm | ≥50mm | ≥50mm | ≥50mm |
| Longitudinal wire spacing | 50-200 mm | 50-200 mm | 50-200 mm | 50-200 mm |
| Min. power | 160KVA | 160KVA | 160KVA | 160KVA |
| Best power | 400 KVA | 500 KVA | 630 KVA | 800 KVA |
| Welding speed | 40-60t/min | 40-60t/min | 40-60t/min | 40-60t/min |
| Control system | PLC | PLC | PLC | PLC |
Applications
The fence welder is designed to manufacture fencing mesh and mine timbering mesh with great efficiency. The versatility of the equipment allows for the production of beautiful fences as well as for highly practical mesh used to add a level of safety in mining applications.
