Fuel Water Separators/Oil- and Liquid Separators/Oil & Water Separation Filter
Request a Quote
The fuel water separator is one type of fuel filters, which is used for removing water or contaminants from fuel to prevent engine failure and extend engine working life. It works via the principle of gravity settling/separation caused by the density difference between water and fuel.
Features
- Improved water/oil separation filter based on swirl flow pre-filter.
- High filtration efficiency of removing more than 90% water, dirt and debris.
- Automatic dirt discharge.
- 2~8 times longer cleaning and replacement period of filter element than normal filters.
- Reduced engine wear and longer engine service life.
- Decreased fuel consumption
- Easy installation and maintenance free.
Technical Specifications
- Rated pressure: 0.4Mpa; Rated flow rate: 340L/h
- Initial filtration efficiency: ≥98% for 30 μm particles
- Water separation efficiency: ≥93%；
- Operating temperature: -40℃~ 120°C
- Vibration fatigue test. Test conditions: oil temperature 60°C, pumping pressure 350KPa, vibration frequency 67Hz, vibration acceleration 93.8g/s², vibration duration100h. Test result: No oil leakage, no parts damage and oil pump in normal operation.
- Control unit. Working voltage: 12V. Working current: ≤6A. Control period: 180±5s.
- Working life of electric oil pump: ≥500h
- Electric pump specifications
| Suction Height | ≥75cm in 5s |
| Rated Voltage | 12V |
| Oil Pumping Rate (zero load) | 180 200L/h |
| Oil Outlet Pressure | ≥350KPa, flow rate≥110L/h |
| Current | ≤6A |
Related Products
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos
