Modular Air Cooled Water Chiller Manufacturer

Modular Air Cooled Water Chiller

Request a Quote

View All: http://moldingmachinepart.com/5-2-air-cooled-chiller.html

Introduction
The modular air cooled water chiller features a fan coil or heat sink with an air flow unit to perform heat exchanging allowing for cooling and heating operations.

Technical Parameters Of Air Cooled Water Chiller

Model Unit			MWV-A 65T4/S-B	MWV-A 130T4/S-B	MWV-A 195T4/S-B	MWV-A 260T4/S-B	MWV-A 325T4/S-B	MWV-A 390T4/S-B
Nominal refrigerating capacity		KW	65	130	195	260	325	390
		USRT	18.48	36.96	55.44	73.93	92.41	110.89
		×104Kcal/h	5.59	11.18	16.77	22.35	27.94	33.53
Refrigerating power		KW	19.4	38.8	58.2	77.6	97	116.4
Cryogen	Type	R22/R410a
Cryogen	Control	thermal expansion valve /electronic expansion valve
Compressor	Type	High efficiency full closed compressor
Compressor	Quantity	unit	2	4	6	8	10	12
Fan	Type	Axial fan
	Quantity	unit	2	4	6	8	10	12
	Power	KW	0.75×2	0.75×4	0.75×6	0.75×2	0.75×4	0.75×6
	Air volume	m³/h	24000	48000	72000	96000	120000	144000
Evaporator	Type	High efficiency shell tube heat exchanger
	Chilled water flow	m³/h	11.3	22.6	33.9	45.2	56.5	67.8
	Water resistance of unit	Kpa	48	48	48	48	48	48
Power supply specification	Operating voltage V/Electric current A		380/40.6	380/81.2	380/121.8	380/162.4	380/203	380/243.6
Inlet and outlet pipe size	mm		DN65	DN100	DN100	DN125	DN150	DN200
Outline size	length * width * height							5462×2050×2185
Unit weight	kg		870	1500	2280	3000	3780	4560

The above parameters may be changed due to the improvement of the product performance. The company reserves the right to change the product design without notice. Please use the brand name parameter as the standard.

Features Of Air Cooled Water Chiller:
1． Modular design of cold water machine
2． Can be designed to separate layers and areas to send cooling to all rooms without a unified wind and water pipe
3． Under some cold loads, you can open only a part of the host unit, which is especially suitable for a place where only part of the room is needed for air conditioning at night.
4． Adoption of parallel connection mode make sure the failure of a single module will not affect the other units.
5． The module chiller adopts hydrophilic aluminum foil and high efficient heat exchange copper tube to ensure the heat exchange efficiency of the unit.
6． No dead keratosis cream to ensure stable operation of the unit in winter.
7．With adoption of eight stage motor, the fan has low noise and can operate more stable.
8. Adopting the design of shell tube heat exchanger to prevent heat exchanger blocking and pipe freezing. The refrigeration capacity is raised by 5% to 7%.
9. The damping pad block is added to reduce the vibration and noise of the unit during operation, so as to prevent the leakage because of the refrigerant breaking.
10.The unit can work without any auxiliary heating above -10°C degree and the low temperature unit can stable operate above -25°C.