XGN2-12 High Voltage Switch Cabinet, Switchgear
XGN2-12 is fixed metal-enclosed high voltage switch cabinet. Designed by ToMa for 10kV high voltage switch cabinet, XGN2-12 is widely used in high voltage motor control. Frequent operation is acceptable and no need to worry about fire hazards.
XGN2-12- 1 high voltage switch cabinet: 2650*1100*1200mm
XGN2-12- 2 high voltage switch cabinet: 2650*1200*1200mm
1. XGN2-12 cabinet adopts assembling type and is made by C-type and G-type steel. Flexible adaptability to various main connection plans.
2. The cabinet inside is separated by steel plates and composes breaker chamber, bus chamber, cable chamber, and relay chamber. Working conditions of components can be monitored through the window on cabinet door and lightings. The front upper part is relay chamber where signal relay can be installed on the door, and panel, signal lamp and switch can be installed in the chamber. The rear upper part is bus chamber. The rear lower part is cable chamber which is convenient for wiring. The front lower part is breaker chamber which is convenient for maintenance.
3. Protection grade is IP2X.
4. We avoid adoption of any interphase or ground insulation barrier. Interphase and ground air insulation distance is over 125mm. Switch cabinet is highly insulated and stable.
5. Cable termination is 600-800mm away from ground, which brings convenience to the installation of cables and its inspection and maintenance. The gap between cable chamber and cable trough is sealed by tower-type rubber rings to avoid humidity and incoming of small animals.
