180° Hydraulic Overturning Machine (Moving Type)
Turner/ Positioner/ Hydraulic Turner
Description of 180° Hydraulic Overturning Machine
Moving type 180° overturning machine can support the clapboard welding area, backing welding, submerged arc welding, and welding seam inspecting area. It is used for overturning the Box-beam workpiece, and is composed by two sets of overturning machines, one hydraulic station and one electrical control box.
Workpiece overturning process including:
1) Two overturning machines move to the place which under the workpiece;
2) One rocker arm first overturn 90°to near workpiece’s vertical surface;
3) Two rocker arms turn back 45° simultaneously to to raise the workpiece from the roller conveyor;
4) Two overturning machines move simultaneously, and move the workpiece to suitable position;
5) The two rocker arms turn back 45° again and workpiece overturn 90°, then lay it on the roller conveyor.
6) The rocker arm which has turned 90°back to horizontal level;
7) Two overturning machines move simultaneously to Procedure 1 position;
8) Repeat Procedure 2 to Procedure 6, thus can overturn the workpiece to 180°.
| Track gauge | 700 mm |
| Overturning capacity | ≤20 T |
| Moving speed | 5 m/min |
| Moving motor power | 2.2 kW×2 |
| Hydraulic system power | 30 kW |
| Hydraulic system working pressure | 25 MPa |
