Welding Machine Assembly Line (Fully Automatic)
Welding Machine Assembly Line, Automatic Assembly Line for Welding Equipment, Assembly System for Welding Machine
Dimensions of assembly line: 15(L) ×1.95 (W) × 1.95 (H) m
Dimensions of work table: 500(L) × 500(W) × 20(T) mm
Hoisting System
1. DPG 60W motor
2. Cylinder 2-position 5-way solenoid valve
3. OMRON limit switch
Transmission System
1. DPG 60W motor
2. OMRON limit switch SKK sensor
Dimensions of assembly line: 20(L) ×1.95 (W) × 1.88 (H) m
Work table
Covered with green anti-static rubber, with dimensions of 500(L) × 500(W) × 20(T) mm
Hoisting System
1. DPG 60W motor
2. Cylinder 2-position 5-way solenoid valve
3. OMRON limit switch
Transmission System
1. DPG 60W motor
2. OMRON limit switch SKK sensor
Machine Structure
1. The support makes use of 50mm× 50mm× 2.0mm steel square tubes. The height of work table is 740±20 mm.
2. Both sides of the assembly line utilize high strength 100× 118 mm aluminum material is used.
Worktable
The work table is coated with anti-static rubber and covered with T-shaped binding tape at corners. It’s 700mm long, 600mm wide and 25mm thick.
Hoisting System
1. Cylinder 2-position 5-way solenoid valve
2. OMRON limit switch
3. Pulley
Assembly System
1. The bracket is made using 40mm×40mm×2.0mm. The work table is 740±20 mm high. The exterior frame is produced from steel.
2. 28W energy saving tubes are used. The tube bracket is made from 25×50 mm steel tubes.
3. Each work position in the power system is outfitted with two-port outlet.
4. Pulley
Test System Weld System
1. The bracket is made using 40mm×40mm×2.0mm. The work table is 740±20 mm high.
2. External frame utilizes 25×130 mm aluminum material.
3. Power for test system
4. Pulley
Package System
1. The bracket is made using 40mm×40mm×2.0mm. The work table is 740±20 mm high.
2. 28W energy saving tubes are used. The tube bracket is made from 25×50 mm steel tubes.
3. External frame utilizes top quality steel.
4. Pulley
Major Parts of Fully Automatic Assembly Line for Welding Machine
Drive System
1. Yong Kun 2HP horizontal motor, 1: 120 gearbox
2. Working speed: 6 meters/min
3. RF2060 high-speed chain
Electric System
1. Mitsubishi PLC
2. Mitsubishi air switch
3. OMRON relay
Work Table
The table makes use of 20 mm plates and is covered with anti-static rubber and T-shape binding tape.
Barrier
The barrier is controlled by a foot switch.
Others
1. The support makes use of 50mm× 50mm× 2.0mm steel square tubes. The height of work table is 740±20 mm.
2. Both sides of the assembly line utilize high strength 100× 118 mm aluminum material is used.
3. T5 18W LED tubes are applied for lighting. The light bracket is produced from 20×50 mm steel tubes.
4. The power system is installed with a socket every 1.2 meters.
5. 40SM and 20PH connectors are implemented.
6. Aluminum materials and A4 acrylic board are applied in the work table.
7. 28×35mm aluminum material is used for the guide rail.
Currently, we are able to offer fully automatic assembly line for welding machines of 15 meters, 20 meters and 48 meters.
