Benchtop Vision Guided 3-Axis Dispensing Robot
The benchtop vision guided 3-axis dispensing robot is a high precision dispensing robot & jet dispenser that is at the top of the industry in terms of performance, usability, reliability and other aspects. It meets all customer requirements for both production efficiency and process quality.
- CCM
- VCM
- Flat motor
- Linear motor
- Fingerprint identification
- FPC flexible printed circuit
- Integrated circuit
- Integrated circuit under fill
- Micro electrical machine system
- Organic light-emitting diode, OLED
Features
1. High-performance
This equipment uses a servo motor and lapping leading screw module to ensure high accuracy, high speed, high efficiency, and high consistency of the system.
The repeatable positioning accuracy of the platform reaches 0.01mm. The platform is equipped with an independent core pneumatic controller or jetting valve to achieve a highly precise, stable discharge of fluid and precise control of trajectory.
The non-contact mode can achieve the stability of 0.25mm glue line width or dot diameter.
2. Intelligent design
A variety of intelligent modules such as intelligent identification, laser altimetry, automatic needle correction, on-line UV exposure, liquid-level detection are available
3. Special functions
It has a unique dispensing process module. Air-blowing and air-inhalation are two ways to automatically clean the glue valve, which effectively prevents glue hanging.
| Model | VS-300 | |
| Structure | Rectangular coordinates type | |
| Axis No. | 3 | |
| Max acceleration X/Y/Z (g) | 1g/1g/0.5 | |
| Motion range X/Y/Z (mm) | 300/300/100 | |
| Speed Range (m/s) | X/Y | 1000 |
| Z | 500 | |
| Repositioning accuracy (mm) | X/Y/Z | ±0.025 |
| Resolution (mm) | X | 0.004 |
| Y | ||
| Z | ||
| Loading-plate load(kg) | 10 | |
| Z axis load(kg) | 5 | |
| Power (W) | 450 | |
| Driving type | AC servo | |
| Transmission type | Lead screw | |
| Programming type | Based on PC development | |
| Camera pixel | 1.3M pixel | |
| Light source | LED (blue or red) | |
| Weight (kg) | 76 | |
| Dimension (L*W*H) | 576×514×626 | |
| Input voltage | 220V AC 50Hz | |
| Work environment | Temperature 0-40℃, Humidity 20-90% (No condensation) | |
| | ||
- Three-axis platform
- Red and blue visual module
- Dispensing process module
- Laser height sensor
- Height calibration module
- On-line UV curing module
- Pneumatic jetting valve (common configuration, hot melt adhesive configuration HM, anaerobic adhesive configuration AA)
- Piezoelectric jetting valve (common configuration, hot melt adhesive configuration HM, anaerobic adhesive configuration AA)
- Pneumatic stabilization module
- Pneumatic alarm module
- Liquid level measurement
industrial robot, glue dispenser, liquid dispersing
