Fiber laser Cutting Machine with Shuttle Table
This kind of fiber cutting machine has automatic shuttle table. It only takes 15 seconds for loading and unloading with high efficiency. Automatic translation shuttle table driven by variable frequency motor brings strong machine body and high processing precision compared with chain drive structure. With open structure and laser power as high as 6000 W, this kind of machine can effectively cut 0.4-22 mm carbon steel sheet, 0.4-16 mm stainless steel sheet, 0.4-10 mm brass and other kinds of metal materials.
PartsThe machine body uses surrounding enclosure design to protect operators from laser radiation, dust and noises.
The double chucks were used to grasp the tube, the square tube and other kinds of tubes.
The laser head can change the laser beam focus automatically by setting the parameters to cut plates with different thickness or punch a hole efficiently, and the double water-cooling device has been installed in the laser head to protect the lens form overheating, which can keep the accuracy of focus and make the working life longer.
Parameters| Model | PS3015 PS4015 PS4020 PS6020 |
| Working Area | 3000*1500mm 4000*1500mm 4000*2000mm 6000*2000mm |
| Laser Power | 500W 800W 1000W 1500W 2000W 3000W 4000W 6000W |
| Laser Wave Length | 1064nm |
| Working Table | Sawtooth |
| Maximum Idle Running Speed | 1200mm/s |
| Position Accuracy | ±0.05mm/m |
| Position Speed | 20m/min |
| Minimum Line Width | ± 0.02mm |
| Cutting Thickness | ≤24mm |
| Control System | Cypcut |
| Position Type | red dot |
| Power Consumption | ≤50KW |
| Working Voltage | 380V/50Hz |
| Auxiliary Gas | oxygen,nitrogen,air |
| Working life of fiber module | More than 100000 hours |
| Fiber laser cutting head | Lasermech made in USA |
| Focus lens | Lasermech made in USA |
| Driver system | 1500W Fuji servo motor made in Japan |
| Liner guider system | PMI made in Taiwan , (Option THK made in Japan) |
| Transmit system | Dual Rack & Pinion type |
| Rack system | made in Germany |
| Chain system | Igus made in Germany |
| Warranty time | 3 years |
