Peach Shape Post
What differs the peach shape post most from other types of fencing posts is its slotting design and peach-shaped cross section, which allows the fencing component to be more aesthetically outstanding. Recent years has seen an increasing popularity of the peach shape post among international customers. If you are living in a yacht, or going to a scenic area or airport, chances are that you will see a XiangMing metal peach shape post.
The peach-shaped cross section starts with bending a flat piece of sheet metal. First, a triangular tube shape is formed with two sides of the sheet bent towards the center line. Then the two edges curl up to develop hooks. There are numbers of U-shaped notches cut into edges on both sides along the length of the peach shape post to which wire mesh is connected.
Installation Guide of Peach Shape Post
1. Put up a metal fencing post first and secure it to the ground. This is where the whole fence set-up begins.
2. Connect one side of the wire mesh to the notches along the post. Then attach the other side the meshwork to another post. Please do not fixate the second peach shape post until the meshwork is stretched taut.
3. Repeat the cycle and finish enclosing the entire site.
Specifications
Size: 50mm×70mm, 70mm×100mm
Thickness: 1.2mm, 1.5mm
Length: Customized
