1310nm 8mw-10mw DFB High Power Pigtailed Laser Modules
Request a Quote
The 1310nm 8mw-10mw DFB high power pigtailed laser modules have an excellent simulation performance due to the use of the DFB chip. This laser module features a power output range of 8 to 10 mw, which makes it ideal for use in CATC, digital, and analog signal transmission.
Absolute Maximum RatingsParameter | Symbol | Min. | Max. | Unit | Test Condition |
Storage Temperature | Tstg | -40 | 100 | °C | - |
Operating Temperature | Top | -40 | 85 | °C | - |
Forward Current(LD) | If(LD) | | 150 | mA | |
Reverse Voltage(LD) | Vr(PD) | | 2 | V | |
Forward Current(PD) | If(LD) | | 2 | mA | |
Reverse Voltage(PD) | Vr(PD) | | 15 | V | |
Soldering Temp | - | - | 260 | °c | - S |
Soldering Time | - | - | 10 | s |
Parameter | Symbol | Min. | Tvp. | Max. | Unit | Test Condition |
Rated Power | Po | 8 | 10 | | mW | Ith 40mA |
Slope Efficiency | SE | | 0.25 | 0.30 | mW/mA | |
Threshold Current | Ith | | 10 | 15 | mA | - |
Operating Current | lop | | 45 | 50 | mA | |
Forward Voltage Drop | Vop | - | 1.0 | 1.2 | V | CW,Ith 40mA |
Cent Wavelength | λc | 1300 | 1310 | 1320 | nm | - |
Spectrum Width(-3dB) | Δλ | - | 0.5 | 1 | nm | Ith 40mA |
Side-mode Suppression Ratio | SMSR | 35 | | - | dB | - |
Bandwidth | Bw | | 2.5 | | GHz | |
Monitor Current | Im | 100 | | 1200 | uA | CW, Ith 40mA |
Dark Current of Monitor | Id | - | - | 100 | nA | 5V |
Optical Isolation(Single stage) | ISO | 35 | 40 | - | dB | |
Optical Isolation(Double stage) | ISO | 45 | 50 | - | dB | |
Return loss | RL | | | -45 | dB | |
Analog Characteristic index | ||||||
Relative Intensity Noise | RIN | - | -155 | -150 | dB/Hz | - |
RF Bandpass Flatness | BF | | ±1.5 | | dB | |
Third-order Distortion | IMD3 | - | -55 | - | dBc | |
Carrier Noise Ratio | CNR | 51 | - | - | dB | Note 1 |
Composite Second Order | CSO | - | - | -57 | dBc | |
Composite Triple Beat | CTB | - | - | -65 | dBc |
Note 1:
① If=Iop, Optical Modulation, Index=3.2%/channel (minimum),60 PAL-D unmodulated carries (47 to 550MHz), 10km single mode fiber, -1dBm received power, Receiver responsivity=0.85A/W.
② If=Iop, Optical Modulation, Index=3.2%/channel (minimum), CNR, CSO, CTB tested value at worst case over all test frequencies. NTSC 120ch., 10km single mode fiber, -1dBm received power, Receiver responsivity=0.85A/W
Related products
Send Message
Other Products
Most Recent
More
Other Products
Videos